Abstract:ABSTRACTAlthough steel moment resisting frame (MRF) systems had long been recognized as effective seismic resistant structures, recent earthquake events and seismic loss estimations indicated that uniform damages of structural members and significant residual deformations would be expected after even a moderate earthquake event for steel MRF systems designed following the conventional ductility‐based design philosophy, and this incompleteness produced the impetus for overhaul of design methodologies and developing innovative systems. With the goal of enhancing the seismic performance of steel MRF structures in low‐to‐moderate seismic regions, this research explored the seismic behavior of high‐strength‐steel (HSS) frame with energy dissipation bays (EDBs) equipped with buckling hinge beams, denoted as the HSSF‐BHEDB system. In particular, the HSS frame is composed of steel with the nominal yield strength higher than 460 MPa, and the buckling hinge beams in the EDBs are constructed with cross‐sections classified as Class 3 or Class 4 by Eurocode 3. The motive of the novel design concept was to improve the structural nonlinearity of steel MRF systems with encouraging damage evolution mode and controllable residual deformations under earthquakes, and the limited energy dissipation of both the buckling hinge beams composed of slender cross‐sections and HSS members can provide a solution for structures in low‐to‐moderate seismic regions. In this work, the design concept and the rationale of the HSSF‐BHEDB were explored in detail. Then, a large‐scale quasi‐static test of a structure was conducted to provide experimental evidence and assess the feasibility of the design concept, and the behavior of the specimen from inception of yielding to failure was completely investigated. The test results showed that the system was characterized by the damage‐control behavior that diverted inelastic damages in the buckling hinge beams of the energy dissipation bay (EDB) in a wide deformation range. In the stage where the HSS frame initiated inelasticity and the energy dissipation of buckling hinge beams deteriorated, a ductile manner was still achieved. In addition, the controllable residual deformations of the specimen highlighted the satisfactory recentering behavior of the HSSF‐BHEDB structure. Lastly, the applicability of the bilinear hysteretic model of significant post‐yielding stiffness ratio and trilinear hysteretic model for featuring the hysteretic behavior of the HSSF‐BHEDB system in different yielding stages were validated by the test results.

11.14: Seismic Performance of High‐strength‐steel Frame with Buckling Hinge Beams in Energy Dissipation Bays

Seismic Performance of High-Strength-steel Frame Equipped with Sacrificial Beams of Non-Compact Sections in Energy Dissipation Bays

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Seismic Performance of Mrfs with High Strength Steel Main Frames and Edbs

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Damage-Control Evaluation Of High-Strength Steel Frames With Energy Dissipation Bays

High-strength Steel Frames with SMA Connections in Self-Centring Energy-Dissipation Bays: Insights and a Multimodal Nonlinear Static Procedure

High Strength Steel Frames with Curved Knee Braces: Performance-based Damage-Control Design Framework

Energy Factor of High-Strength-steel Frames with Energy Dissipation Bays under Repeated Near-Field Earthquakes

Experimental Study on Seismic Performance of Ultrahigh-Strength Steel Frames with Buckling-Restrained Braces

Research on the Seismic Performance of High Strength Steel Frames

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Research Progress On Seismic Performance Of Steel Frames Equipped With Sma-Based Self-Centring Energy Dissipation Bays (Scedbs)

Damage-control Steel Frames Equipped with SMA Connections and Ductile Links Subjected to Near-Field Earthquake Motions: A Spectral Energy Factor Model

Damage-control design and hybrid tests of a full-scale two-story buckling-restrained braced steel moment frame with sliding gusset connections

Self-centring Hybrid-Steel-frames Employing Energy Dissipation Sequences: Insights and Inelastic Seismic Demand Model

Steel Moment Resisting Frames with Energy-Dissipation Rocking Columns under Near-Fault Earthquakes: Probabilistic Performance-Based-plastic-design for the Ultimate Stage

Seismic performance of shear energy dissipation beams in D-shaped eccentrically braced steel frames

Application of seismic resilient energy-dissipative rocking columns with HSS tension braces in steel frames

Hybrid-self-centring steel frames: Insights and probabilistic seismic assessment