Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3>CO2 reforming of methane, also known as dry reforming of methane, has received significant attention because this technology can convert notorious greenhouse gases (CH4/CO2) into useful syngas (H2/CO). However, this technology still hasn't been commercialized, primarily due to the lack of feasible catalysts. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3>Based on zirconia (ZrO2) nanoparticles with pure monoclinic (m) or tetragonal (t) crystal phase, three nickel (Ni) catalysts (Ni/m‐ZrO2, Ni/t‐ZrO2 and Ni/m‐ZrO2@Al2O3) have been synthesized for CO2 reforming of methane. The Ni/t‐ZrO2 catalyst exhibited lowest reforming activity with CH4 conversion of 15.5% at 700 °C under 1 atm with a gas hourly space velocity (GHSV) of 96 000 mL/(h gcat). The Ni/m‐ZrO2 catalyst showed much higher initial activity but underwent severe deactivation, over which CH4 conversion decreased from 56.1% to 33.4% after 300 min of reaction. The nanocomposite Ni/m‐ZrO2@Al2O3 catalyst with confinement effect possessed the best activity and good stability. Specifically, its CH4 conversion decreased merely from 60.2% to 55.3% after 24 h of reaction. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3>Structural characterizations demonstrate that limited specific surface area and weak metal‐support interactions existed on the Ni/t‐ZrO2 catalyst, which led to large Ni nanoparticles and thus poor reforming activity. Both Ni/m‐ZrO2 and Ni/m‐ZrO2@Al2O3 catalysts had high specific surface area and tiny Ni nanoparticles, which may rationalize the high reforming activity. The improved stability on the Ni/m‐ZrO2@Al2O3 catalyst was mainly related to the alleviated carbon deposition endowed by enriched surface basicity and strengthened metal‐support interactions. This article is protected by copyright. All rights reserved.</section>

Bi-reforming of Methane with Steam and CO2 under Pressurized Conditions on a Durable Ir-Ni/MgAl2O4 Catalyst.

Ultra-durable Ni-Ir/MgAl2O4 catalysts for dry reforming of methane enabled by dynamic balance between carbon deposition and elimination

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Performance of Ni/MgO–AN Catalyst in High Pressure CO 2 Reforming of Methane

Reforming Of Methane And Coalbed Methane Over Nanocomposite Nni/Zro2.

The Key Points of Highly Stable Catalysts for Methane Reforming with Carbon Dioxide

Trireforming Of Methane To Syngas Over Supported Carbide Catalysts

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

Effect of Bimetallic Ni-Cr Catalysts for Steam-CO2 Reforming of Methane at High Pressure

Study Of Durable Catalyst For Methane Reforming Using Co2

Reforming of methane and coalbed methane over nanocomposite Ni/ZrO2 catalyst

Carbon Dioxide Reforming of Methane over Ni-based Catalyst

A nanoscale Ni/ ZrO 2 catalyst coated with Al 2 O 3 for carbon dioxide reforming of methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Dry Reforming of Methane on a Highly-Active Ni-CeO2 Catalyst: Effects of Metal-Support Interactions on C-H Bond Breaking

Reaction Pathway for Coke-Free Methane Steam Reforming on a Ni/CeO2 Catalyst: Active Sites and the Role of Metal-Support Interactions

Realization of High-Pressure Dry Methane Reforming by Suppressing Coke Deposition with Co-Rh Intermetallic Clusters

Coke-resistance over Rh–Ni bimetallic catalyst for low temperature dry reforming of methane

CO2 Reforming of Methane to Syngas at High Pressure over Bi-Component Ni-Co Catalyst: the Anti-Carbon Deposition and Stability of Catalyst

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane