Abstract:The main technologies for carbon dioxide capturing are analyzed. Promising technologies include “before burning” CO2 capture and CO2 injection into depleted oil fields to enhance oil recovery, which make it possible not only to reduce residual oil saturation, but also to reduce carbon dioxide emissions into the atmosphere effectively. The energy costs of amine processes for extracting carbon dioxide from biogas are analyzed with the use of computer simulation. To extract carbon dioxide from process gases a traditional single-flow absorption scheme can be used in which MDEAmod absorbents the optimal in terms of energy performance minimizing. The MDEAmod absorbent is universal and can be used in CO2 extraction processes, including those under high pressure, from various process gases, in which the CO2 content can vary over a wide range of concentrations and reach 45 % (vol.). The use of this absorbent reduces the heat consumption for the regeneration of the saturated sorbent by 1.4–2.5 times compared to 18 % MEA and reduces the absorbent consumption by 30 %. A laboratory unit for extracting target fractions of biomethane and carbon dioxide from biogas has been created. The model calculation results of the amine CO2 extracting from biogas and those obtained on a laboratory unit are quite close and the deviation of the calculated from the experimentally obtained CH4 concentration in biomethane at a pressure in the absorber Pabs = 0.11–0.2 MPa does not exceed 3 %. The results of extracting carbon dioxide from biogas modeling can be used to optimize the technological absorption schemes for the production of biomethane - an analogue of natural gas. Experimental technology has been developed and equipment for the production and decomposition of natural gas and carbon dioxide hydrates has been created. The thermodynamic parameters of hydrate formation by bubbling have been determined, and hydrate samples have been obtained. Thermodynamic trend of pressure difference of 1.5–2 MPa to methane replace with carbon dioxide in hydrates was experimentally established and thus the possibility of replacing methane gas hydrates with carbon dioxide and using this technology for the conditions of developing gas hydrate deposits in the Black Sea was confirmed. Bibl. 30, Fig. 10, Tab. 3.

Decarburization method adopting diethyl carbonate as absorbent

Carbon elimination technique using dimethyl carbonate as absorbing agent

CO2 trapping method combining dimethyl carbonate absorption and membrane desorption

Performance Evaluation of CO2Capture with Diethyl Carbonate

Absorbent for collecting and separating CO2 and use thereof

CO 2 Absorption Using Biphasic Solvent: Blends of Diethylenetriamine, Sulfolane, and Water

Research on Modern CO2 Absorption Process

Novel energy saving CO2 trapping process of improved potassium carbonate

Experimental Study on CO2 Absorption in Novel Biphasic Solvents and CO2 Desorption by Novel Direct Non-Aqueous Gas Stripping Process

Enhancement of CO2 Desorption from a Novel Absorbent (dimethyl Carbonate) by Using a PDMS/TiO2 Pervaporation Membrane

Study on Polydimethylsiloxane Desorption Membrane of CO 2 - Dimethyl Carbonate System

Energy-efficient non-aqueous biphasic solvent for carbon capture: Absorption mechanism, phase evolution process, and non-corrosiveness

Novel Nonaqueous Liquid–Liquid Biphasic Solvent for Energy-Efficient Carbon Dioxide Capture with Low Corrosivity

Dynamics Of Co2 Absorption And Desorption Processes In Alkanolamine With Cosolvent Polyethylene Glycol

Performance Evaluation of CO2 Capture with Diethyl Succinate

Retrieval of CO2 from a carbonate solution for its sequestration by a novel electrochemical decarbonizing and ingathering method

Solvent Regeneration by Novel Direct Non-Aqueous Gas Stripping Process for Post-Combustion CO2 Capture

CO2 Absorption Performance in Advanced Water-Lean Diamine Solvents

PROMISING TECHNOLOGIES AND EXISTING EXPERIENCE OF CARBON DIOXIDE EXTRACTION FROM PROCESS AND WASTE GASES

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas

Design and Optimization of Reactive Dividing-Wall Extractive Distillation Process for Dimethyl Carbonate Synthesis Based on Quantum Chemistry and Molecular Dynamics Calculation