Abstract:Some recent studies have highlighted the potential of adsorption technology for greenhouse gas CO2 capture from the flue gases. The pressure/vacuum swing adsorption (PSA/VPSA), temperature swing adsorption (TSA) and electrical swing adsorption (ESA) have attracted much research effort with the development of the novel CO2 adsorbents materials. Carbonaceous materials are the promising candidate adsorbents, since they have high BET surface area, better CO2 adsorption capacity and novel morphologies (monolith, bead, fiber). Moreover, these adsorbents materials are also unique to undergo direct-electrothermal regeneration. In this paper, carbonaceous materials with four morphologies (granular, monolith, fiber and bead) are used to capture CO2 from the flue gas. Activated carbon beads were made in our laboratory with 2000-3000 m2/g BET surface area and better electrical conductivity. The research contents include the adsorption equilibrium isotherms, breakthrough curves, electrical energy consumption at direct-electrothermal desortpion, and the optimization of the cycle adsorption/desorption processes. The experimental apparatus for the optimization of the cycle adsorption/Direct-electrothermal desorption process comprise an adsorber with 40-100mm height and 25-50mm diameter, an electricity heating unit, a cooling unit, a vacuum unit, a gas detection unit, a data acquisition and control system. The heating step by electricity is very fast, about 2-5 minutes to raise the temperature of adsorbents from 30°C to 150°C when using 50 V voltages. But the cooling step is very slow due to the poor heat conductivity of porous adsorbents, so the alternative cooling units are designed, one using the direct cooling unit with air or nitrogen passing through the column, the other one as the indirect cooling unit by the medium of water or heat transfer oil indirect cooling adsorbents. Three processes of the cycle adsorption/desorption to capture CO2 from the flue gases using carbonaceous materials are investigated, which included the conventional vacuum swing adsorption process, the electrical swing adsorption process, and the combined process of vacuum swing adsorption and direct-electrothermal regeneration. The mathematical models are proposed for different capture processes using activated carbons with four morphologies (granular, monolith, fiber, beads). Based on the experimental and theoretical investigations, the product recovery, purity, and the energy consumption of the adsorption processes for CO2 capture from the flue gas are compared, and the feasibilities of the capture processes using carbonaceous materials are evaluated comprehensively.

Novel energy saving CO2 trapping process of improved potassium carbonate

CO2 trapping method combining dimethyl carbonate absorption and membrane desorption

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Energy-efficient CO2 capture using potassium prolinate/ethanol solution as a phase-changing absorbent

A High Adsorption Capacity Bamboo Biochar for CO2 Capture for Low Temperature Heat Utilization

Recent Advances in Potassium-Based Adsorbents for CO2 Capture and Separation: a Review

CO2 Capture by Improved Hot Potash Process

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Electrolytic Regeneration of Decarbonising Potassium Carbonate Solution

Experimental investigation on continuous reaction crystallizer for CO2 capture by phase-change method

The Latest Advances in Carbon Dioxide Capture Technologies

Retrieval of CO2 from a carbonate solution for its sequestration by a novel electrochemical decarbonizing and ingathering method

Decarburization method adopting diethyl carbonate as absorbent

Carbon elimination technique using dimethyl carbonate as absorbing agent

Effect of Borate Catalysis on CO2 Absorption by Potassium Carbonate Solutions

Simulation of Carbon Dioxide Direct Air Capture Plant Using Potassium Hydroxide Aqueous Solution: Energy Optimization and CO2 Purity Enhancement

Carbon dioxide capture by adsorption of carbonaceous materials with direct-electrothermal desorption

Sustainable CO2 management through integrated CO2 capture and conversion

The Current Situation and Development of CO2 Trapping and Treatment Technique in Coal-Fired Power Station

A hybrid absorption-adsorption method to efficiently capture carbon

Effect of K2CO3·1.5H2O on the Regeneration Energy Consumption of Potassium-Based Sorbents for CO2 Capture