Abstract:In recent years, hybrid nanofluids, as a new kind of working fluid, have been widely studied because they possessing better heat transfer performance than single component nanofluids when prepared with proper constituents and proportions. The application of hybrid nanofluids in nuclear power system as a working fluid is an effective way of improving the capability of In-Vessel Retention (IVR) when the reactor is in a severe accident. In order to obtain hybrid nanofluids with excellent heat transfer performance, three kinds of hybrid nanofluids with high thermal conductivity are measured by transient plane source method, and their viscosity and stability are also investigated experimentally. These experimental results are used to evaluate the heat transfer efficiency of hybrid nanofluids. The results show that: (1) The thermal conductivity of hybrid nanofluids increases with increasing temperature and volume concentration. When compared to the base fluid, the thermal conductivity of Al2O3-CuO/H2O, Al2O3-C/H2O and AlN-TiO2/H2O nanofluids at 0.25% volume concentration increased by 36%, 24%, and 22%, respectively. (2) Surfactants can improve the stability of hybrid nanofluids. The Zeta potential value is related to the thermal conductivity of the hybrid nanofluids, and it could be used to explain the relationship between the thermal conductivity of the hybrid nanofluids and the dispersion. It also could provide a reference for subsequent screening of high thermal conductivity nanofluids. (3) The addition of C/H2O can effectively reduce the dynamic viscosity coefficient of hybrid nanofluids. (4) The analysis of heat transfer efficiency of the hybrid nanofluids found that both Al2O3-CuO/H2O and Al2O3-C/H2O have better heat transfer ability than water under certain mixing conditions. This study is conducive to further optimizing hybrid nanofluids and its application to the In-Vessel Retention in severe reactor accidents.

Experimental Study on the Performance of Wind Stirring System with Different Working Fluids

Experimental Study on the Heating Effect of a Wind-Energy Stirring Heater

Study on the Influence of Working-Fluid’s Thermophysical Properties on the Stirring-Heating

Start-up performance and optimization of the stirring wind-heating system

Experimental and Numerical Study of a Water-Stirring Radiator

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks

Effect of Mechanical Stirring on the Tubular Heating Process of Crude Oil

Experimental Investigation of Hydrodynamics and Suspension Characteristics in a Boiling Stirred Tank Reactor with Helical Coils

Experimental Study of Kinetic to Thermal Energy Conversion with Fluid Agitation for a Wind-Powered Heat Generator

EXPERIMENTAL STUDY ON WIND ENERGY CONVERTING TO HEAT BY INCREASING FLUID PRESSURE AND FLOW THROTTLING

Influence of rotation on heat absorption performance of solid–liquid phase change tank

Experimental Study on Fluid Thermal Stratification During Operation of Thermodynamic Vent

Evaluation of Variable Rotation on Enhancing Thermal Performance of Phase Change Heat Storage Tank

Performance Improvement of Wire-Bonded Mesh Screen Flat Heat Pipe Using Water-Based Nanofluid

Research and application of a domestic system of wind power directly stirring heating---Taking northeast China as an example

Experimental Study on the Thermal Properties and Stability of Hybrid Nanofluids and Evaluation of Its Heat Exchange Efficiency

Study on Enhanced Heat Transfer and Stability Characteristics of Al2O3–SiO2/Water Hybrid Nanofluids

Preparation and characterization of phase change material emulsions and their applications in liquid cooling systems for wind turbines

Boiling Heat Transfer Enhancement of Nanofluids on a Smooth Surface with Agitation

Enhancement study of turbulent heat transfer performance of nanofluids in the clover static mixer