Abstract:Mechanical compaction is an important diagenetic process in sandstone reservoirs. Particle breakage, which commonly occurs during mechanical compaction, plays a significant role in controlling the physical properties of the reservoir. However, existing numerical simulation methods have limitations in simulating mechanical compaction when considering particle breakage. In this study, a discrete element simulation method of mechanical compaction was proposed based on particle cutting, and the experimental results reported in the literature were used to calibrate the simulation parameters. Finally, this method was applied to the simulation of the mechanical compaction of sandstone to analyze the pore evolution process. The results show that the new simulation method has high computational efficiency and can reflect the process of particle breakage. The simulation results coincide well with the experimental results. In the simulated mechanical compacted process of coarse sandstone, particle breakage is strong in the high-stress stage with a vertical stress of 30 MPa–50 MPa. The porosity and mean radii of pores and throats decreased rapidly, and the number of pores and throats increased rapidly in the high-stress stage. When the vertical stress reached 50 MPa, compared to the simulation results without considering particle breakage, the porosity difference rate caused by particle breakage was 4.63%; the radius difference rates of pores and throats were 2.78% and 6.8%, and the number difference rates of pores and throats were 4.95% and 8.74%, respectively. In the process of mechanical compaction, the pore evolution of the reservoir is controlled by the filling of the pre-existing pore space by the fragments generated through particle breakage and the generation of microfractures. Additionally, the simulation method presented in this study can be applied to complex geological conditions and can be combined with other reservoir simulation methods. The simulation results can provide rich training samples for artificial intelligence and other emerging technologies.

Numerical and Experimental Investigation of the Argillaceous Sandstone Mechanical Properties by the Discrete Element Method.

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Study on the correlation and calibration of macro and micro parameters of discrete element model for sandstone

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Numerical simulation of mechanical compaction and pore evolution of sandstone considering particle breakage

An experimental and numerical investigation on mechanical behavior of sandstone specimens saturated in brine

Experimental and Numerical Simulation Study on Shear Strength and Secondary Particle Breakage of Coarse Sand with Different Dry Densities

Experimental Investigation and Micromechanical Modeling of Elastoplastic Damage Behavior of Sandstone

Mechanical Properties and Permeability Evolution of Red Sandstone Subjected to Hydro-mechanical Coupling: Experiment and Discrete Element Modelling

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

Experimental and numerical investigation of the mechanical properties and energy evolution of sandstone–concrete combined body

Experimental investigation and fractional elastoplastic damage constitutive modelling of gray sandstone under loading disturbance

Laboratory Observation and Micromechanics-Based Modelling of Sandstone on Different Scales

Experimental Investigation of Sand Subjected to High Stress Levels in Wet and Dry Conditions

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity sandstone

Experimental and model investigation on hydro-mechanical behaviour of sandy mudstone

EXPERIMENTAL STUDIES AND CONSTITUTIVE MODEL OF ELASTOPLASTIC MECHANICAL BEHAVIORS OF SANDSTONE WITH HYDRO-PHYSICOCHEMICAL INFLUENCING EFFECTS

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Experimental and numerical study on the mechanical behaviors and crack propagation of sandstone containing two parallel fissures