Abstract:The flexural strengthening of concrete structures by the near-surface-mounted (NSM) method has proven to be a reliable alternative to the existing externally bonded (EB) method using carbon fiber-reinforced polymer (CFRP) composites. However, the NSM method has not been used as widely as the EB method, and many factors influencing the effectiveness of NSM-CFRP bars still need to be investigated and clarified. Therefore, a total of eight concrete beams were constructed and tested. The effects of different parameters, including the number of NSM-CFRP bars, prestressing in NSM-CFRP, and the type of end treatment-for reduced/delayed end bond failure-on the performance of the strengthened beams were investigated. The test results demonstrated that the use of NSM-CFRP bars is effective in increasing the flexural capacity of concrete beams. However, when the number of CFRP bars was increased from one to two, only the postyielding cross-section stiffness of the beam displayed a better performance. The prestressed beams exhibited a higher cracking load and a higher yield load compared with the nonprestressed beams. The prestressing considered in this regard was 40% of the ultimate capacity. Three end treatments were considered: U-shaped steel-plate hoops, expanded groove at the ends of the bar, and reduced resin modulus at the bar ends when prestress is released. Of these, the end treatment using a U-shaped steel-plate hoop developed in this article was simple and effective and was capable of increasing the ductility of both prestressed and nonprestressed beams. By addressing the effects of the aforementioned factors on the NSM strengthened beams, this paper offers valuable information for the increased implementation of this technique. (C) 2013 American Society of Civil Engineers.

Smart FRP bars for strengthening RC beam

Strain Monitoring of RC Members Strengthened with Smart NSM FRP Bars

Smart FRP-OFGB bars and their application in reinforced concrete beams

Application Of Smart Bfrp Bars With Distributed Fiber Optic Sensors Into Concrete Structures

Smart FRP-OFBG bars and their application in reinforced concrete beams

Flexural response of FRP-strengthened lightweight RC beams: hybrid bond efficiency of L‐shape ribbed bars and NSM technique

Strengthening with Near Surface Mounted Reinforcement: Structural and Fire Behavior

TESTS ON RC T-BEAMS STRENGTHENED IN FLEXURE WITH A GLUED AND BOLTED CFRP LAMINATE

Self-Monitoring Fiber Reinforced Polymer Strengthening System for Civil Engineering Infrastructures

A new type of smart basalt fiber-reinforced polymer bars as both reinforcements and sensors for civil engineering application

Performance Improvement of a Fiber-Reinforced Polymer Bar for a Reinforced Sea Sand and Seawater Concrete Beam in the Serviceability Limit State

Real time evaluation of load of smart CFRP reinforced steel concrete beam

Sensing properties of carbon fiber and hybrid Fiber Reinforced Polymer bars as strain sensors

Interaction Forces in RC Beams Strengthened with Near-Surface Mounted Rectangular Bars and Strips

Experimental Investigation of Smart FRP-concrete Composite Beam with Embedded FBG Sensors

Strengthening of RC beams in shear with novel near-surface mounted (NSM) U-shaped fiber-reinforced polymer (FRP) composites

Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials

Reinforced concrete beams strengthened in flexure with near-surface mounted (NSM) CFRP strips: Current status and research needs

Flexural Strengthening of Concrete Beams with Near-Surface Mounted Steel–fiber-Reinforced Polymer Composite Bars

Intelligent FRP Retrofits for Critical Civil Infrastructures

Performance and Parametric Analysis of Flexural Strengthening for RC Beams with NSM-CFRP Bars