Bond Performance of NSM FRP Bars in Concrete with an Innovative Additional Ribs Anchorage System: an Experimental Study
Qiang Wang,Hong Zhu,Ting Li,Gang Wu,Xiuxiu Hu
DOI: https://doi.org/10.1016/j.conbuildmat.2019.02.020
IF: 7.4
2019-01-01
Construction and Building Materials
Abstract:Bond failure due to a lack of anchorage capacity is often observed when using FRP reinforcement as a strengthening method in RC structures, thus restricting the efficiency in upgrading their structural performance. To address this issue, our research group has recently developed a simple and innovative additional ribs anchorage system for FRP bars, which has been verified to have the high efficiency of improving the anchorage performance of FRP bars reinforced in concrete. As a promising strengthening method in RC structures, the near-surface mounted (NSM) fiber-reinforced polymer (FRP) technique has become popular. However, bond failure also exists in the NSM FRP strengthening system. It is also important to initiate a study on the bond performance of NSM FRP bars which are mounted in concrete using the proposed additional ribs. In this study, a total of 36 direct pull-out specimens and 12 beam pull-out specimens were employed. In particular, the influences of additional ribs on the bond behavior of FRP bars mounted in concrete in terms of the failure modes, local bond stress distribution, and load-slip curves were discussed. Several important parameters expected to affect the bond performance were investigated, namely, the type and the bonded length of the FRP bars, groove size and section configuration, and adhesive species. The test results and corresponding analysis in this paper demonstrated the feasibility and significant efficiency of using the proposed additional ribs anchorage system to enhance the bond performance of NSM FRP bars in concrete.