Experimental and theoretical analyses on semi-rigid pin joints under in-plane direction bending in modular reticulated shell
Ai-Lin Zhang,Chong Li,Yan-Xia Zhang,Xue-Chun Liu
DOI: https://doi.org/10.1016/j.jcsr.2021.107128
IF: 4.349
2022-03-01
Journal of Constructional Steel Research
Abstract:A new semi-rigid pin joint equipped with a simple assembly procedure provides a promising solution for the realization of modular and rapid assembly of steel-reticulated shells. Because the novel joint can adapt to the complex curvature change of the reticulated shell, it can be arranged in the middle of the reticulated shell member. Moreover, this type of arrangement can significantly reduce the number of assembled joints in the reticulated shell. The purpose of this study was to explore the anti-rotation performance of semi-rigid pin joints in the in-plane bending direction of a reticulated shell. First, through static loading experiments, the mechanical properties of the semi-rigid pin joints were investigated. The parameters considered in the experiment included the diameter of the wing plate pin, thickness of the wing plate, and diameter of the screw rod. To evaluate the static performance of the joint, the parameters of the joint, such as the initial stiffness, ultimate bending moment, and failure mode, were analyzed in detail. The results revealed that the semi-rigid pin joint exhibited good bending stiffness under in-plane direction loads. Simultaneously, a finite element model of the semi-rigid pin joint was established using ABAQUS, and several parameters of the joint were analyzed under the premise of agreement between the test and finite element model. Finally, a theoretical analysis model was established based on the power function model to predict the bending moment-rotation angle (M-Φ) curves of the semi-rigid pin joints under different parameter combinations. The results proved that the prediction formula provided accurate results compared with the experimental results.
construction & building technology,engineering, civil