Abstract:Single layered domes are susceptible to large deflections and their post-buckling behavior is influenced by the connection system used. Numerous investigations have been carried out on the stiffness characteristics and of hollow spherical joints and their effect on the post-buckling behaviour of domes. However, research on the behavior of circular plated joints and their effect on the dome post-buckling are limited. Factors such as the combination of forces transferred to the joint, thickness of the circular joint plates and location of the joint in the dome have been found to influence the behaviour of the joint and the deformation of the connections reduce the limit point of the dome. Therefore, this study highlights the influence of the deformability of the circular plated joints on the elastic post-buckling behaviour of single layer domes. The deformation of the circular plated joints are investigated by geometric nonlinear finite element analysis in ABAQUS. It is found that the deformations increase with increase in ratio of minor to major force and the variation in stiffness of the plates along these directions are greater for thicker plates. Provision of shear connector i.e., a plate element between the webs of members along the direction of principal tension is effective in limiting the connection deformations. The deformability of the joints under various loading conditions are presented based on the results of the numerical investigations. The effect of the circular plate deformations on the stability of the dome are analysed using the corotated-Updated Lagrangian formulation where, the stiffnesses of the circular plates obtained from the ABAQUS analysis are included as linear springs in series with the members of the dome. Reduction in the limit point of the domes is observed, particularly with thinner circular plates.

Elasto-plastic stability analysis of K8 single-layer reticulated shells with bolt-ball joint system

INSTABILITY BEHAVIOR OF PARTIAL DOUBLE-LAYER LATTICE-RIBBED DOMES

Stability analysis of the partial double-layer forms derived from the complete double-layer reticulated dome

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Structural formation and stability performance investigations of large partial double layer reticulated shell structures

STATIC STABILITY ANALYSIS OF SINGLE-LAYER K8-ELLIPSOID RETICULATED SHELL

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Dynamic Analysis of Suspend-Dome

Numerical Investigation on Stability of Reticulated Shell Structures Composed of Built-Up Plate Members

Rotational performance of semi-rigid plate-type joints for reticulated shell structures composed of plate members

METICULOUS STUDY ON DYNAMIC PERFORMANCE OF SUSPEND-DOME STRUCTURE UNDER SEVERE EARTHQUAKES

MULTI-SCALE FINITE ELEMENT SIMULATION OF RETICULATED SHELL CONSIDERING DEFORMATION OF WELDED HOLLOW SPHERICAL JOINTS

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

RIGIDITTY OF WELDED HOLLOW SPHERICAL JOINTS ON FINITE ELEMENT ANALYSIS PRECESION OF RETICULATED SHELLS

Dynamic Response Analysis of Deployable Lifting Construction Process of Reticulated Shell Structures

Elasto-plastic Stability Bearing Capacity Calculation for K8 Single-layer Reticulated Shells under Fire Conditions

Study on Elasto-Plastic Stability Bearing Capacities for K6 Single-Layer Reticulated Shells under Fire Conditions

Nonlinear Dynamic Stability Analysis of K8 Single-Layer Latticed Domes

Buckling Behaviour of Aluminium Ball Jointed Single Layered Reticular Domes

Elastic Post-Buckling Analysis of Single-Layer Domes with Circular Plated Connections