Abstract:Manufactured by laser cutting technology with planar steel plates, the plate members have significant advan-tages in efficiency, customization, and transportation. These advantages make the plate members suitable for building small or medium-span curved reticulated shell structures. The plate members have been adopted in a novel reticulated shell structure with stiffening methods for resolving local buckling issues. In this type of structure, the semi-rigid plate-type joints are used to connect plate members. The previous study indicated that the rotational stiffness of plate-type joints has a great impact on structural stability. To investigate the rotational performance of the semi-rigid plate-type joints, a comprehensive study has been conducted in this research. Experimental tests were performed on a total of 12 specimens to obtain the moment-rotation responses of the joints. Four phases of the failure process were observed in the tests, namely, the linear elastic phase, slipping phase, hardening phase, and failure phase. The influences of joint width, joint thickness, and bolt diameter on the rotational performance are revealed by the experiments. Then, a refined finite element (FE) model was built and validated by the experimental results. This validated FE model clarified the failure mechanism of joints from the perspective of stress development and contact condition. Furthermore, theoretical formulas were established to calculate the key characteristics of the moment-rotation response, which is proved to have acceptable accuracy in predicting the rotational performance of joints. The conclusions of this study may provide a valuable reference for the structural stability design of reticulated shell structures composed of plate members.

Mechanical Performance of Single-Layer Reticulated Shells with Semi-Rigid Bolt-Ball Joints

Rotational performance of semi-rigid plate-type joints for reticulated shell structures composed of plate members

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Formation and Buckling Performance Investigations on Partial Double Layer Reticulated Spherical Domes of High Rise/Span Ratios

INSTABILITY BEHAVIOR OF PARTIAL DOUBLE-LAYER LATTICE-RIBBED DOMES

Experimental research on hinged single-layer folded-plane reticulated shell

Structural formation and stability performance investigations of large partial double layer reticulated shell structures

Stability analysis of the partial double-layer forms derived from the complete double-layer reticulated dome

MULTI-SCALE FINITE ELEMENT SIMULATION OF RETICULATED SHELL CONSIDERING DEFORMATION OF WELDED HOLLOW SPHERICAL JOINTS

Research on Cylindrical Latticed Intersected Three-Dimensional Beam System Reticulated Megastructure with Single Layer Latticed Intersected Cylindrical Shell Substructure

RIGIDITTY OF WELDED HOLLOW SPHERICAL JOINTS ON FINITE ELEMENT ANALYSIS PRECESION OF RETICULATED SHELLS

Structural Form and Mechanical Properties of the Suspended Cylindrical Lattice Shells

Research On Structural Form And Mechanical Properties Of The-Suspended Cylindrical Lattice Shells

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Numerical Investigation on Stability of Reticulated Shell Structures Composed of Built-Up Plate Members

METICULOUS STUDY ON DYNAMIC PERFORMANCE OF SUSPEND-DOME STRUCTURE UNDER SEVERE EARTHQUAKES

Experimental and theoretical analyses on semi-rigid pin joints under in-plane direction bending in modular reticulated shell

Research On Influence Of Constrain Stiffness To Mechanical Response Of Suspen-Dome

Influence of restraining stiffness on mechanical properties of suspen-dome

Experimental Research on a Composite Structure Combined of Cable Dome and Single-Layer Lattice Shell