Abstract:Manufactured by laser cutting technology with planar steel plates, the plate members have significant advan-tages in efficiency, customization, and transportation. These advantages make the plate members suitable for building small or medium-span curved reticulated shell structures. The plate members have been adopted in a novel reticulated shell structure with stiffening methods for resolving local buckling issues. In this type of structure, the semi-rigid plate-type joints are used to connect plate members. The previous study indicated that the rotational stiffness of plate-type joints has a great impact on structural stability. To investigate the rotational performance of the semi-rigid plate-type joints, a comprehensive study has been conducted in this research. Experimental tests were performed on a total of 12 specimens to obtain the moment-rotation responses of the joints. Four phases of the failure process were observed in the tests, namely, the linear elastic phase, slipping phase, hardening phase, and failure phase. The influences of joint width, joint thickness, and bolt diameter on the rotational performance are revealed by the experiments. Then, a refined finite element (FE) model was built and validated by the experimental results. This validated FE model clarified the failure mechanism of joints from the perspective of stress development and contact condition. Furthermore, theoretical formulas were established to calculate the key characteristics of the moment-rotation response, which is proved to have acceptable accuracy in predicting the rotational performance of joints. The conclusions of this study may provide a valuable reference for the structural stability design of reticulated shell structures composed of plate members.

Research on global stability of K6-type single-layer spherical timber reticulated shells

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Configuration, Static and Stability Analysis of Torsional Lattice Shell Composed of Six-bar Tetrahedral Units

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Structural formation and stability performance investigations of large partial double layer reticulated shell structures

Design and Stability Analysis of Single Layer Elliptical Shell-Composite Deck Slab Hybrid Structure with Large Holes

INSTABILITY BEHAVIOR OF PARTIAL DOUBLE-LAYER LATTICE-RIBBED DOMES

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

Research on Cylindrical Latticed Intersected Three-Dimensional Beam System Reticulated Megastructure with Single Layer Latticed Intersected Cylindrical Shell Substructure

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Rotational performance of semi-rigid plate-type joints for reticulated shell structures composed of plate members

Numerical Investigation on Stability of Reticulated Shell Structures Composed of Built-Up Plate Members

Configuration,static and stability analysis on new-type six-bar tetrahedral cylindrical lattice shells

STATIC STABILITY ANALYSIS OF SINGLE-LAYER K8-ELLIPSOID RETICULATED SHELL

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

MULTI-SCALE FINITE ELEMENT SIMULATION OF RETICULATED SHELL CONSIDERING DEFORMATION OF WELDED HOLLOW SPHERICAL JOINTS

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Experimental investigation on mechanical performance of K6 single-layer reticulated glulam shells

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Study on Elasto-Plastic Stability Bearing Capacities for K6 Single-Layer Reticulated Shells under Fire Conditions