Abstract:This paper presents a practical engineering model to determine the flammability properties and predict the fire performance of Intumescent Fire Retardant (IFR) coatings by performing experiments on a 5.0 nun inert steel substrate in the Cone Calorimeter. The present model simplifies the complete conservation equations governing the IFR system by utilizing the assumptions that the initial IFR coating layer (virgin plus melt) is thermally thin and its expanding char layer, which includes also the vapor and the foam, has negligible volumetric heat capacity. These simplifications eliminate the requirement in the existing models for determination of numerous expansion and thermal properties for the IFR coating and its resulting char. The thermal insulation effect of the expanded char is represented as a ratio between the heat flux received by the substrate and the heat flux imposed on the substrate surface for the case there is no char layer. This heat flux ratio is expressed as a function of the expanded char height history, which is related to the mass loss rate and total mass loss of the IFR coating as determined from modeling of mass loss rate based on TGA measurements. This type of modeling for the IFR expansion height is based on the observation that the mass loss as measured from the TGA experiments is in fact contributing, through chemistry and diffusion, to the formation of the gas bubbles in the expanded char. The accuracy and robustness of the model are validated by comparing its predictions of expansion height and steel plate temperature in Cone Calorimeter experiments at different heat fluxes for two commercial IFR coatings having different initial masses. Compared to other simple empirical models or complicated modeling efforts, our model includes the basic physics of IFR expansion and insulation in a comprehensive way. Improvements

Fire Safety Research Institute Materials and Products database—A resource to support fire modeling

An Experimental and Numerical Study on Fire Behaviors of Charring Materials Frequently Used in Buildings

Basic Polymer Material Properties for Flame Spread

Fire dynamics simulator modeling of a line-of-duty death in a firefighting training facility using recent research on materials and firefighter safety

Prediction of Large Scale Fire Behavior Using Nuterial Flammability Properties

A Review of Combustion and Flame Spread over Thermoplastic Materials: Research Advances and Prospects

Materials identification in comparison of results among fire scaling and flammability studies

An Experimental Study of the Rate of Gas Temperature Rise in Enclosure Fires

PMMA Pyrolysis Simulation -- from Micro- to Real-Scale

Development of Fire Field Model Incorporating Pyrolysis for Burning of Flame-Retardant Polystyrene in Enclosures

Numerical Simulation of Coupled Pyrolysis and Combustion Reactions with Directly Measured Fire Properties

Flammability properties for charring materials

Measurements of specific heat capacity of common building materials at elevated temperatures: a comparison of DSC and HDA

Reduced scale test bench for investigating the upward flame heat impact on external thermal insulation composite system facades

A Study of Thermal Degradation and Fire Behaviour of Polymer Composites and Their Gaseous Emission Assessment

Parameterising study of tunnel experiment materials for application to the Fire Dynamics Simulator pyrolysis model

Parametric analysis of input data on the CFD fire simulation

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades

A Methodology and a Simple Engineering Fire Performance Model for Intumescent Fire Retardant Coatings

An assessment of recent thermal radiation model performance for propane gas fire experiments

Fundamental Flame Spread and Toxicity Evaluation of Fire Retarded Polymers