Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Concrete strength for fire safety design

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Effect of fire on concrete and concrete structures

Fire performance of composite columns made of high strength steel and concrete

Experimental investigation on fire resistance of high-strength concrete encased steel composite columns

Simple Calculation Method Of Determining The Post-Fire Residual Strength Of Concrete-Filled Steel Tubular Columns

Concrete-Filled Hollow Structural Steel Columns after Exposure to Iso-834 Fire Standard

Optimal Determination Of The Cover Of Concrete Beam Under Multi-Enviornmental Conditions

An Experimental Study and Calculation on the Fire Resistance of Concrete-Filled SHS and RHS Columns

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

AN ADEQUATE THEORY FOR THE SHEAR STRENGTH OF REINFORCED CONCRETE STRUCTURES

Experimental Study on the Mechanical Properties of Reinforced Concrete Columns after Exposure to Fire

Simplified Method for Residual Strength of Concrete-Filled after Exposure to Fire

Fire Resistance Design of Concrete-Filled Steel Tube Stub Columns

When Fire Attacks: How does Concrete Stand up to Heat ?

Fire retardation, compressive strength and durability analysis of concrete reinforced with novel plasters: An experimental, computational and statistical research

Experimental Performance of Concrete-Encased CFST Columns Subjected to Full-Range Fire Including Heating and Cooling

Repeated Impact Response of Normal- and High-Strength Concrete Subjected to Temperatures up to 600 °C

Tests on Cyclic Behavior of Concrete-Filled Hollow Structural Steel Columns after Exposure to the ISO-834 Standard Fire

Performance of Concrete-Filled Steel Tubular Column-Wall Structure Subjected to ISO-834 Standard Fire: Analytical Behaviour