Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

The Noise Prediction of Structures with an Adaptive Acoustical Boundary Element Integral Method

An Improved Boundary Element Method for Predicting Half-Space Scattered Noise Combined with Permeable Boundaries

Prediction and Experiment for Near-Field Sound Radiation of Cylindrical Shells

Sound Field Separating on Arbitrary Surfaces Enclosing a Sound Scatterer Based on Combined Integral Equations.

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

An Efficient Method for Acoustic Response Prediction in the Mid-Frequency Range

Optimal Active Noise Control of Sound Field in Enclosures

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

[Coronary heart disease, standard bicycle ergometry, and hemostatic function (author's transl)].

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Prediction of Noise Reduction Effect with Acoustic Modeling

Topical tacrolimus in the treatment of inverse psoriasis in children.

Méthode de calcul du rayonnement acoustique de structures complexes

Sensitivity Analysis of Underwater Structural-Acoustic Problems Based on Coupled Finite Element Method/Fast Multipole Boundary Element Method with Non-Uniform Rational B-Splines

A semi-implicit immersed boundary method for simulating viscous flow-induced sound with moving boundaries

Numerical Aeroacoustic Noise Prediction for Complex HVAC Systems

Some Spherical Boundary Elements and A Discretization Error Indicator for Acoustic Problems with Spherical Surfaces

Sensitivity analysis of non-uniform rational B-splines–based finite element/boundary element coupling in structural-acoustic design

Prediction for architectural structure-borne sound by the finite-difference time-domain method

A reduced-order boundary element method for two-dimensional acoustic scattering

Prediction of Time Domain Vibro-Acoustic Response of Conical Shells using Jacobi–Ritz Boundary Element Method