Abstract:Traffic noise is a major problem in all large cities. The surface acoustical characteristics (e.g. referred to roads, pedestrian traffic areas, building façades, building surfaces, in general) affect the noise propagation in the urban environment. Through a better outdoor design and management (e.g. by means of green areas, porous asphalt, speed control), or building refurbishment actions (acoustic plaster, absorbing shading devices), the increasing of surface absorption could be useful to mitigate noise environmental pollution, and therefore to reduce the sound levels in the proximity of the building façades for their entire height. The reduction of the noise levels outside the buildings would determine lower indoor noise levels, and therefore a better situation, without direct actions on the building walls. Through a series of noise propagation calculations in urban environments, by means of a three-dimensional simulation model, the influence of some configurations and the potential impact of some intervention solutions are quantified. In the first stage of the research, the analysis of a simplified model is conducted, to evaluate the influence of noise on the building façades, based on a simplified geometry of the urban environment and of the surface acoustic features. The same analysis is validated by means of a more detailed model, corresponding to the configuration of an existing built area, to verify if the analyses performed by means of the simplified model can be extended to more complex layouts. Successively, calculations are developed to quantify the noise levels that occur with different acoustic (absorption of façades, soil, asphalt, or green elements) and geometric (road width, buildings height, presence of balconies, etc.) characteristics to show the potential reduction given by some interventions. Solutions that can lead to a more significant reduction of the noise in correspondence of the façades are then summarized. The simplified geometrical model appears to be suitable for preliminary investigations as the maximum error found for narrower roads is equal to 17%.

Prediction of Noise Reduction Effect with Acoustic Modeling

The Computing Model of Noise Iinfluence for Elevated Railway in Urban

Noise Suppression Design of Residential District in Outskirts by Calculating Machine Simulation

A Model for Highway Traffic Noise Prediction Based on the Concept of Equivalent Traffic Flow

[Optimally Control Urban Railway Noise by Sound Propagation Path].

[The Computer Simulating Prediction Method of Noise of Underground Garage in Urban Residential Region].

Noise Control for Slipway and Prediction of Barrier Noise Reduction Effect

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

NOISE CONTROL OF HOTEL VENTILATION SYSTEM AND PREDICTION OF NOISE REDUCTION

Research on noise reduction characteristic of sound barrier on natural draft wet cooling towers

Sea for Predicting the Efficiency of Noise Reduction Solutions Applied to an Air Conditioner Unit

Influencing Factors Identification and Prediction of Noise Annoyance—A Case Study on Substation Noise

Prediction and Analysis of Noise Impact and Noise Reduction Scheme Effect for Complex Road Types

Investigation of Acoustic and Aerodynamic Noise in Air Conditioner Outdoor Unit

Modeling noise from large-scale data center equipment

A GIS based road traffic noise prediction model

Prediction and optimization of aerodynamic noise in an automotive air conditioning centrifugal fan

A simplified model to evaluate noise reduction interventions in the urban environment

Modeling, analysis, and validation of an active T-shaped noise barrier

Evaluation of urban inland waterway traffic noise using a modified Nord 2000 prediction model

Prediction of Noise Reduction Effect of Sound Barriers and Evaluation of Noise Annoyance