Topical tacrolimus in the treatment of inverse psoriasis in children.

J. Steele,Christine Choi,P. Kwong

DOI: https://doi.org/10.1016/J.JAAD.2005.05.036

2005-10-01

Abstract:

What problem does this paper attempt to address?

Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics

Yue Li,Julie Meyer,Tapio Lokki,Jacques Cuenca,Onur Atak,Wim Desmet

DOI: https://doi.org/10.1016/j.apacoust.2022.108662

IF: 3.614

2022-03-01

Applied Acoustics

Abstract:Compared to geometrical acoustics, wave-based methods which solve the wave equation either in the time domain or in the frequency domain are known for their high accuracy. However, their systematic use as professional room acoustic simulation tools is less popular due to the modelling effort and computational time requirements, especially in the case of complex scenarios. This paper aims at providing guidelines for the use of two wave-based methods in complex room acoustics simulations, namely the finite-difference time-domain (FDTD) method and the fast multipole boundary element method (FMBEM). Numerical experiments are conducted to address the convergence issues of the two solvers, more specifically, the selection of the convergence tolerance of the iterative solver in FMBEM and the temporal sampling frequency in FDTD. To evaluate the capability of the solvers in simulating complex scenarios, five cases with increasing complexity of material input data are presented. The results show that both solvers give close predictions for various room acoustics parameters. In addition, an uncertainty sensitivity study is performed in a case where experimental data is available. Large deviations between measured and simulated reverberation time reveal that typical material data-sets poorly represent the behaviour of real materials in a room acoustics context. Lastly, the efficiency of the two solvers is discussed. With parallelization implemented, both solvers can simulate sizeable room acoustic problems with good accuracy within a reasonable time.

acoustics
A reduced-order boundary element method for two-dimensional acoustic scattering

Senhao Zhong,Xinbo Jiang,Jing Du,Jie Liu

DOI: https://doi.org/10.3389/fphy.2024.1464716

IF: 3.718

2024-12-06

Frontiers in Physics

Abstract:The final, formatted version of the article will be published soon. You have multiple emails registered with Frontiers: Please enter your email address: If you already have an account, please login You don't have a Frontiers account ? You can register here This study presents a novel method for wideband acoustic analysis using the Boundary Element Method (BEM). In traditional BEM, analyzing acoustic states across different frequencies requires repetitive computations due to the frequency-dependent system matrix, resulting in significant computational time. To address this, we expand the Hankel function into a Taylor series, enabling the separation of frequency-dependent and frequency-independent components in the boundary integral equations. This leads to the construction of a frequency-independent system matrix.Additionally, the formation of full-rank, asymmetric coefficient matrices in BEM introduces further computational challenges when solving system equations over wide frequency ranges, especially for large-scale problems. To mitigate this, we develop a Reduced-Order Model (ROM) using the Second-Order Arnoldi (SOAR) method, which retains the key characteristics of the original Full-Order Model (FOM). The singularity elimination technique is employed to directly compute the strong singular and super-singular integrals in the acoustic equations. Numerical examples demonstrate the accuracy and efficiency of the proposed approach, which is crucial for practical, large-scale applications in fields such as noise control and acoustic design, where fast and precise analysis is paramount.

physics, multidisciplinary
Analysis of acoustic radiation problems involving arbitrary immersed media interfaces by the extended finite element method with Dirichlet to Neumann boundary condition

Houbiao Ma,Ali Tian,Guohao Sui,Qiaozhong Li,Yahui Zhang

DOI: https://doi.org/10.1016/j.enganabound.2024.105936

IF: 3.25

2024-09-04

Engineering Analysis with Boundary Elements

Abstract:To quantify the influence of moving immersed media on acoustic radiation, this study develops an efficient method for acoustic radiation with arbitrary immersed media interfaces based on the extended finite element method (XFEM) and the Dirichlet-to-Neumann (DtN) boundary condition. The XFEM is employed for efficient and accurate modeling of the acoustic field with boundary shape variations. It requires no modification of the computational mesh and accurately captures non-smooth solutions on the interface by constructing enrichment functions. Additionally, the DtN boundary condition simulates the far-field radiation condition by establishing the relationship between the acoustic pressure and its derivatives. Numerical examples show that the proposed method efficiently characterizes changes in the position of immersed media interfaces without re-meshing the mesh. Variations in the thickness of porous material domains alter the acoustic radiation characteristics, with thicker porous material domains resulting in more pronounced noise reduction effects. Compared to changes in the thickness of porous material domains, changes in their position significantly alter the distribution of radiation pressure, indicating that ideal noise reduction effects can be achieved by strategically placing porous materials in specific locations in practical engineering applications.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Low-Frequency Acoustic-Structure Analysis Using Coupled FEM-BEM Method

Jinlong Feng,Xiaoping Zheng,Haitao Wang,HongTao Wang,Yuanjie Zou,Yinghua Liu,Zhenhan Yao

DOI: https://doi.org/10.1155/2013/583079

IF: 1.43

2013-01-01

Mathematical Problems in Engineering

Abstract:A numerical algorithm based on finite element method (FEM) and boundary element method (BEM) is proposed for the analyses of acoustic-structure coupled problems. By this algorithm, the structural domain and the acoustic domain are modelled by FEM and BEM, respectively, which are coupled with each other through the consideration of the appropriate compatibility and equilibrium conditions on the interface of the two domains. To improve the computational efficiency, the adaptive cross approximation (ACA) approach is incorporated into the proposed algorithm to deal with the nonsymmetric and fully populated matrices resulting from the coupling of the FEM and BEM. The validity and the high efficiency of the present approach are demonstrated by two examples.
Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Liang Hu,Nannan Zhao,Zhijian Gao,Kai Mao,Wenyu Chen,Xin Fu

DOI: https://doi.org/10.1088/1361-6501/aaaafb

IF: 2.398

2018-01-01

Measurement Science and Technology

Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.
Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Ning Chu,Yue Ning,Liang Yu,Qin Liu,Qian Huang,Dazhuan Wu,Peng Hou

DOI: https://doi.org/10.1109/tim.2021.3077670

IF: 5.6

2021-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:The acoustic imaging results in the diffuse field are seriously affected by reverberation. The acoustic source localization algorithms based on the free-field assumption will produce many artifacts in the reverberant environment. To achieve accurate acoustic source localization in a reverberant environment, a sound field morphological component analysis (SF-MCA) model and an enhanced alternating direction method of multipliers (ADMM) algorithm are proposed in this article. First, the solution of the inhomogeneous Helmholtz equation is analyzed to characterize the acoustic components. Second, Green's function and plane-wave basis function serve as dictionaries for sparse representation of the acoustic signal in the frequency domain, and the corresponding decomposition coefficients are obtained by the enhanced ADMM algorithm. Finally, the accurate acoustic imaging results are realized in the reverberant chamber space with strong reverberation ( T 20 =174.30 ms). Experiments demonstrate the validation of the proposed SF-MCA method. The acoustic imaging obtained by the proposed SF-MAC dereverberation model is far superior to the acoustic imaging that treats the reverberation as the general Gaussian noise.
Sound field study of a building near a roadway via the boundary element method

Haibo Wang,Ming Cai,Shuqi Zhong,Feng Li

DOI: https://doi.org/10.1177/1461348417725955

2017-08-21

Abstract:A two-dimensional boundary element method with a constant element type was adopted to study the sound field of a building near a roadway. First, a factor analysis of the computed results has been done, which include the element length, the Hankel functions’ calculation accuracy, and numerical integration accuracy. Then, boundary element method is applied to calculate building attenuation with different building aspect ratios and different frequencies with balconies, followed by drawing of the sound field distribution diagram. The calculation results revealed the following: (1) a wider building results in a more severe sound attenuation; (2) balconies on different floors produce a reduction of approximately 15 dB for broadband spectral characteristics of A-weight road traffic noise, and the maximum values appear at the bottoms of balconies; (3) for the points in the balconies, higher sound frequencies are correlated to larger insertion loss, with the insertion loss increasing from 3 dB to >10 dB when the sound frequency increases from 20 to 4000 Hz; (4) calculations of three typical frequencies indicate that the insertion loss of 500 Hz (main frequency of heavy vehicles) is 6 dB less than that of 800 Hz (main frequency of light vehicles), i.e. the flow control of heavy vehicles could conspicuously improve the ambient acoustic environment of buildings near a roadway.
Numerical research on the focusing characteristics of steady state sound field in finite space by combining finite element and phase conjugation methods

Song Liu,Yifan Du,Yanlin Wang,Panpan Liu,Fang Wu,Peng Gao,Hebin Song

DOI: https://doi.org/10.1177/14613484241233390

2024-03-03

Journal of Low Frequency Noise Vibration and Active Control

Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The research on sound source identification in an infinite free sound field has been relatively in-depth, but there is relatively little research on sound source identification and localization in limited spaces, especially those with sound absorption and insulation materials. The identification and reconstruction of the acoustical steady propagation field radiated from a single frequency finite space are studied numerically using discrete elements based on the phase conjugation method by FEM. Two different kinds of array forms of phase conjugation arrays are studied for sound source localization such as the planar array and the linear array. In addition, the influences of the existence of sound-absorbing material on the wall on the focusing properties are also discussed. The numerical results show that: The phase conjugation method can completely achieve the identification and location of the acoustical source finite space no matter using the planar array form or the linear array according to FEM. The linear array form can obtain the subwavelength focusing with fewer elements. The optimal distance between the array and the sound source is 0.5 [math] and 2 [math] to get the best reconstruction results. The smaller the absorption coefficient, the more to meet the multi-path phase compensation principle, the better reconstruction of the sound source.

acoustics
Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

Bing Fang,Runjie Shen,Jifeng Guo,Wen He,Ming Ma

DOI: https://doi.org/10.4028/www.scientific.net/amr.139-141.1985

2010-01-01

Advanced Materials Research

Abstract:This paper aims to simulate the sound field of rectangular small enclosure excited by panel loudspeaker with FEM. Firstly, in order to testify the fluid-structure interaction theory in the field of acoustics calculation, coupled modal and uncoupled modal of loudspeaker and air were established. Result of harmonic response analysis shows that the vibration amplitude of uncoupled case is larger than the coupled case. The result just is in harmony with the fact. So when modeling the sound field, fluid-structure coupling should be taken into account. Secondly, for more accurate sound field simulation, different from most researchers’ modeling method that supposing the vibrating plate’s boundary of the loudspeaker is simply supported, this paper provide a more practical way that the boundary is elastic supported. The comparison shows that the resonance of air in enclosure is more severe under elastic boundary on condition of same driving force. Thereby the sound pressure is higher.
[Primary B cell lymphoma of the skull following head trauma; a case report].

M. Tagawa,S. Momita,J. Irie

1987-04-01

Abstract:
Sound absorption estimation of finite porous samples with deep residual learninga)

Elias Zea,Eric Brandão,Mélanie Nolan,Jacques Cuenca,Joakim Andén,U Peter Svensson

DOI: https://doi.org/10.1121/10.0021333

2023-10-01

Abstract:This work proposes a method to predict the sound absorption coefficient of finite porous absorbers using a residual neural network and a single-layer microphone array. The goal is to mitigate the discrepancies between predicted and measured data due to the finite-size effect for a wide range of rectangular absorbers with varying dimensions and flow resistivity and for various source-receiver locations. Data for training, validation, and testing are generated with a boundary element model consisting of a baffled porous layer on a rigid backing using the Delany-Bazley-Miki model. In effect, the network learns relevant features from the array pressure amplitude to predict the sound absorption as if the porous material were infinite. The method's performance is quantified with the error between the predicted and theoretical sound absorption coefficients and compared with the two-microphone method. For array distances close to the porous sample, the proposed method performs at least as well as the two-microphone method and significantly better than it for frequencies below 400 Hz and small absorber sizes (e.g., 20 × 20 cm2). The significance of the study lies in the possibility of measuring sound absorption on-site in the presence of strong edge diffraction.
A 2.5D acoustic finite element method applied to railway acoustics

Hui Li,David Thompson,Giacomo Squicciarini

DOI: https://doi.org/10.1016/j.apacoust.2021.108270

IF: 3.614

2021-11-01

Applied Acoustics

Abstract:Railway acoustic problems commonly have a constant cross-section and uniform properties in the longitudinal direction. To solve such 3D acoustic problems with reduced effort, a wavenumber domain acoustic finite element (2.5D acoustic FE) method is introduced in which the cross-section of the domain is meshed and the third dimension is represented by a wavenumber transform. The acoustic wavenumber is thereby decomposed into a combination of wavenumbers in the x direction and in the y-z plane. The method is extended to exterior noise problems by including a perfectly matched layer (PML) with bespoke absorption to prevent reflection of the sound waves at the boundary of the domain. The method as presented can be used with 2D finite element solutions from commercial software. To verify the application of the 2.5D acoustic FE method for interior acoustic problems, sound attenuation in a tunnel is predicted and compared with existing measurements. To verify the implementation for exterior acoustic problems, an example is given of the sound distribution on the side surface of a train due to a compact source below it. The comparison of the solutions obtained from the 2.5D acoustic FE models with measurements shows good agreement in the both validation cases. The method is then used to investigate the effect of the tunnel walls on the sound distribution on the train external surface by comparing the results with the case in the open field. A highly reverberant sound field is found in tunnels, which increases the sound pressure level on the train side-surface above 250 Hz by about 10 dB for a tunnel with a ballasted track and by about a further 6 dB for a slab track.

acoustics
Reduced-basis Boundary Element Method for Efficient Broadband Acoustic Simulation

Hanbo Jiang,Xin Zhang,Xun Huang

DOI: https://doi.org/10.1016/j.jsv.2019.05.017

IF: 4.7

2019-01-01

Journal of Sound and Vibration

Abstract:Growing demand for multi-frequency analysis in acoustics calls for more efficient algorithms. Conventional boundary element method (BEM) is found to be a very promising tool for the investigation of complex acoustic scattering problems. However, the performance of BEM would be compromised for broadband set-ups due to an expensive inverse operation for a dense matrix at multiple frequencies. To address this issue, a new algorithm is proposed by projecting the full-order problem into a low-order subspace to significantly reduce the computational time while still maintaining the high-fidelity. Detailed algorithm implementations and performance comparisons are demonstrated, and the non-uniqueness issue of the conventional BEM is also discussed and solved to guarantee accurate wide-range predictions. The capability of the proposed method is finally demonstrated in a drone noise scattering problem.
A coherent model of sound propagation in long enclosures with different acoustics boundaries

Chen Yan,Qiu Xiao-Jun

2010-01-01

Abstract:The sound field in long enclosures is not diffuse as assumed by the classical theory of room acoustics,because one dimension of the long enclosures is much greater than the other two. The image source method is the most commonly used approach for predicting the sound field of long enclosures. However,the image source method is unlikely to be satisfactory for using in predicting intricate patterns of interference due to contributions from each image source. A theoretical model has been developed for the prediction of sound propagation in a rectangular long enclosure. The model is based on the image-source method,and the effect of interference among the infinite number of image sources generated by multiple reflections is incorporated by coherently summing the contributions from the image sources. The various impedances of the boundaries are considered in the model. The term excess attenuation (EA) is used for the presentation of numerical and experimental results. Experiments were carried out to validate the proposed theoretical model,where the enclosure walls are lined with different kinds of sound absorption material to simulate different impedance boundaries. It is shown that the developed model agrees better with the experimental data than that of the ODEON software,and the trends in the behavior of sound attenuation along the enclosure at different frequency have been correctly predicted.
A validated finite element model for room acoustic treatments with edge absorbers

Florian Kraxberger,Eric Kurz,Werner Weselak,Gernot Kubin,Manfred Kaltenbacher,Stefan Schoder

DOI: https://doi.org/10.1051/aacus/2023044

2023-01-01

Acta Acustica

Abstract:Porous acoustic absorbers have excellent properties in the low-frequency range when positioned in room edges, therefore they are a common method for reducing low-frequency reverberation. However, standard room acoustic simulation methods such as ray tracing and mirror sources are invalid for low frequencies in general which is a consequence of using geometrical methods, yielding a lack of simulation tools for these so-called edge absorbers. In this article, a validated finite element simulation model is presented, which is able to predict the effect of an edge absorber on the acoustic field. With this model, the interaction mechanisms between room and absorber can be studied by high-resolved acoustic field visualizations in both room and absorber. The finite element model is validated against transfer function data computed from impulse response measurements in a reverberation chamber in style of ISO 354. The absorber made of Basotect ® is modeled using the Johnson-Champoux-Allard-Lafarge model, which is fitted to impedance tube measurements using the four-microphone transfer matrix method. It is shown that the finite element simulation model is able to predict the influence of different edge absorber configurations on the measured transfer functions to a high degree of accuracy. The evaluated third-octave band error exhibits deviations of 3.3–4.1 dB computed from third-octave band averaged spectra.

acoustics
Treatment of boundary conditions by finite difference time domain method

Hisaharu Suzuki,Akira Omoto,Kyoji Fujiwara

DOI: https://doi.org/10.1250/ast.28.16

2007-01-01

Acoustical Science and Technology

Abstract:In this paper, we propose a simple method that considers boundary conditions in a finite difference time domain (FDTD) scheme by varying density, sound speed and flow resistance. A method based on a Rayleigh model is also proposed, and by these methods, we can design the frequency characteristics of normal incident absorption coefficient arbitrarily. These methods have three advantages: 1. easy coding, 2. easy designing of a frequency characteristic of normal incident absorption coefficient and 3. easy configuration of material thickness. For example, by our method, we can simulate the sound field in a reverberation chamber with a thick material such as glass wool. To confirm the accuracy of the model used, we compare the normal incident absorption coefficient with a one-dimensional exact solution. Results show that the model is sufficiently accurate. Although our method requires a high cost for calculation power and memory, a practical increase in elapsed time can be ignored. This method provides an easy way of analyzing the inner region of a material.
Potential of Room Acoustic Solver with Plane-Wave Enriched Finite Element Method

Takeshi Okuzono,M Shadi Mohamed,Kimihiro Sakagami

DOI: https://doi.org/10.3390/app10061969

2020-03-13

Applied Sciences

Abstract:Predicting room acoustics using wave-based numerical methods has attracted great attention in recent years. Nevertheless, wave-based predictions are generally computationally expensive for room acoustics simulations because of the large dimensions of architectural spaces, the wide audible frequency ranges, the complex boundary conditions, and inherent error properties of numerical methods. Therefore, development of an efficient wave-based room acoustic solver with smaller computational resources is extremely important for practical applications. This paper describes a preliminary study aimed at that development. We discuss the potential of the Partition of Unity Finite Element Method (PUFEM) as a room acoustic solver through the examination with 2D real-scale room acoustic problems. Low-order finite elements enriched by plane waves propagating in various directions are used herein. We examine the PUFEM performance against a standard FEM via two-room acoustic problems in a single room and a coupled room, respectively, including frequency-dependent complex impedance boundaries of Helmholtz resonator type sound absorbers and porous sound absorbers. Results demonstrated that the PUFEM can predict wideband frequency responses accurately under a single coarse mesh with much fewer degrees of freedom than the standard FEM. The reduction reaches O ( 10 − 2 ) at least, suggesting great potential of PUFEM for use as an efficient room acoustic solver.
An Adaptive Finite Element Method for the Wave Scattering with Transparent Boundary Condition

Xue Jiang,Peijun Li,Junliang Lv,Weiying Zheng

DOI: https://doi.org/10.1007/s10915-017-0382-2

2017-02-10

Journal of Scientific Computing

Abstract:Consider the acoustic wave scattering by an impenetrable obstacle in two dimensions. The model is formulated as a boundary value problem for the Helmholtz equation with a transparent boundary condition. Based on a duality argument technique, an a posteriori error estimate is derived for the finite element method with the truncated Dirichlet-to-Neumann boundary operator. The a posteriori error estimate consists of the finite element approximation error and the truncation error of boundary operator which decays exponentially with respect to the truncation parameter. A new adaptive finite element algorithm is proposed for solving the acoustic obstacle scattering problem, where the truncation parameter is determined through the truncation error and the mesh elements for local refinements are marked through the finite element discretization error. Numerical experiments are presented to illustrate the competitive behavior of the proposed adaptive method.

mathematics, applied
The formulations based on the indirect boundary element method for the acoustic characterization of an arbitrarily shaped source in a bounded noisy environment

Honglin Gao,Qi Zhu,Song Liu,Pengfei Xing,Guobin Li

DOI: https://doi.org/10.1016/j.enganabound.2022.01.021

IF: 3.25

2022-05-01

Engineering Analysis with Boundary Elements

Abstract:In this paper, the formulations based on the indirect boundary element method (indirect BEM) are proposed to recover the acoustic characterization of an arbitrarily shaped source in a bounded noisy environment. The formulations for determining the outgoing pressure field and the scattered pressure field are derived by the indirect BEM. The formulation of the outgoing pressure field derived by the indirect BEM has a unified expression with that derived by the direct BEM. The proposed method could recover the free-field pressure radiated from a target source with an enclosed or unenclosed surface. Four numerical simulations about these two cases, two sources with different measuring surfaces, are performed to validate the proposed method. A comparison of recovering the free-field pressure radiated from a target source with an enclosed surface with the proposed method and the method based on direct BEM is made.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Estimation of the random incidence sound absorption coefficients of different size rectangular samples

Yujun Zhao,Ronald Sauro,Robert Alan Hallman,John Laurence Davy,Mohammad Fard

DOI: https://doi.org/10.1121/10.0022384

2023-11-01

Abstract:The sound absorption coefficient (SAC) of materials measured in a reverberation room is affected by both the intrinsic properties of the material and geometrical dimensions of the sample. A different size of the same material may produce a different SAC primarily due to the edge effect phenomenon. In this research, the experimental data from multiple laboratories was analyzed to evaluate the influence of the edge effect. An empirical function was established based on these measurement data and the linear relationship between the SAC and the relative edge length. Thomasson's method, the two geometric methods, and the analytical method were used to estimate the SAC of an absorber from measurements on a different size sample and compared with results obtained using the empirical function. The results show that the proposed empirical method is a reliable way to predict the SAC of a sample from measurements on a different size sample of the same material, which only requires the thickness, density, and size of the material.

Topical tacrolimus in the treatment of inverse psoriasis in children.

Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics

A reduced-order boundary element method for two-dimensional acoustic scattering

Analysis of acoustic radiation problems involving arbitrary immersed media interfaces by the extended finite element method with Dirichlet to Neumann boundary condition

Low-Frequency Acoustic-Structure Analysis Using Coupled FEM-BEM Method

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Sound field study of a building near a roadway via the boundary element method

Numerical research on the focusing characteristics of steady state sound field in finite space by combining finite element and phase conjugation methods

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

[Primary B cell lymphoma of the skull following head trauma; a case report].

Sound absorption estimation of finite porous samples with deep residual learninga)

A 2.5D acoustic finite element method applied to railway acoustics

Reduced-basis Boundary Element Method for Efficient Broadband Acoustic Simulation

A coherent model of sound propagation in long enclosures with different acoustics boundaries

A validated finite element model for room acoustic treatments with edge absorbers

Treatment of boundary conditions by finite difference time domain method

Potential of Room Acoustic Solver with Plane-Wave Enriched Finite Element Method

An Adaptive Finite Element Method for the Wave Scattering with Transparent Boundary Condition

The formulations based on the indirect boundary element method for the acoustic characterization of an arbitrarily shaped source in a bounded noisy environment

Estimation of the random incidence sound absorption coefficients of different size rectangular samples