Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

Bragg Gratings Inscribed in Solid-Core Microstructured Single-Mode Polymer Optical Fiber Drawn from a 3D-Printed Polycarbonate Preform

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Plane-by-Plane Femtosecond Laser Inscription Method for Single-Peak Bragg Gratings in Multimode CYTOP Polymer Optical Fiber

Inscription of Bragg gratings in undoped PMMA mPOF with Nd:YAG laser at 266 nm wavelength

Fast and stable gratings inscription in POFs made of different materials with pulsed 248 nm KrF laser

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

All Solid Photonic Crystal Fiber Enabled by 3D Printing Fiber Technology for Sensing of Multiple Parameters

Mid-IR Hollow-core microstructured fiber drawn from a 3D printed PETG preform

A Microfiber Bragg Grating Based On A Microstructured Rod

Air-structured optical fibre drawn from a 3D-printed preform

Mechanically Robust Biopolymer Optical Fibers with Enhanced Performance in the Near-Infrared Region

Writing Bragg Gratings in Multicore Fibers

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Single-Mode Nonlinear-Optical Polymer Fibers

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond laser direct-writing of high quality first-order Bragg gratings with arbitrary complex apodization by phase modulation

Mid-infrared hollow core fiber drawn from a 3D printed chalcogenide glass preform

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond laser inscribed fiber Bragg gratings based on precise spatial apodization