Abstract:The freeze–thaw cycle (FTC) is one of the major factors leading to damage to reinforced concrete (RC) structures in severely cold regions. The seismic resistance of FTC-damaged RC beam–column connections is critical to the assessment of structural safety. However, studies on the seismic resistance of FTC-damaged RC beam–column connections under severely cold environments are still scarce. In this study, the seismic resistance of FTC-damaged RC connections was investigated in terms of the failure process, hysteresis, energy consumption, core area shear behavior, etc. Furthermore, the effects of FTC action at the microscopic level and macroscopic level and the damage mechanisms of the connections were investigated. The results showed that the shear force ratio of the connections varied via the "diagonal compression strut model" and "truss model" propagation due to the FTC-induced deterioration of the bond performance between the longitudinal rebar and concrete in the beam end; this variation in the shear force ratio, in turn, led to the transformation of the failure mode of the connections. Moreover, as the number of FTCs increased, the ductility of the connections increased slightly, and the shear distortion in the core region as well as its contribution to the whole displacement gradually rose. When the shear–compression ratio is >0.208, increasing the axial force ratio will reduce the load carrying capacity and the shear distortion in the core zone. Based on the test results, a calculation model of the shear force–strain envelope curve of RC connections that integrates the effects of the inhomogeneous temperature field distribution and axial compression ratio was established.

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Mesoscale Simulation of Bond Behaviors Between Concrete and Reinforcement under the Effect of Frost Damage with Axisymmetric Rigid Body Spring Model

Coupled Thermo‐hydro‐mechanical Analysis of Reinforced Concrete Beams under the Effect of Frost Damage and Sustained Load

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Structural behaviors evaluation of the frost damage for RC beams founded on non-coordinated deformation from pores

RBSM-based Mesoscale Study of Frost Deterioration for Recycled Concrete Considering Air-Entrainment in Old and New Mortar

RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

FROST DAMAGE OF REINFORCED CONCRETE BEAMS AND ANALYTICAL EVALUATION OF ITS STATIC FAILURE BEHAVIOR

Mesoscale simulation of frost damage to rock material based on Rigid Body Spring Method

Experimental investigation of the seismic resistance of RC beam–column connections after freeze–thaw cycle treatment