Abstract:The freeze–thaw cycle (FTC) is one of the major factors leading to damage to reinforced concrete (RC) structures in severely cold regions. The seismic resistance of FTC-damaged RC beam–column connections is critical to the assessment of structural safety. However, studies on the seismic resistance of FTC-damaged RC beam–column connections under severely cold environments are still scarce. In this study, the seismic resistance of FTC-damaged RC connections was investigated in terms of the failure process, hysteresis, energy consumption, core area shear behavior, etc. Furthermore, the effects of FTC action at the microscopic level and macroscopic level and the damage mechanisms of the connections were investigated. The results showed that the shear force ratio of the connections varied via the "diagonal compression strut model" and "truss model" propagation due to the FTC-induced deterioration of the bond performance between the longitudinal rebar and concrete in the beam end; this variation in the shear force ratio, in turn, led to the transformation of the failure mode of the connections. Moreover, as the number of FTCs increased, the ductility of the connections increased slightly, and the shear distortion in the core region as well as its contribution to the whole displacement gradually rose. When the shear–compression ratio is >0.208, increasing the axial force ratio will reduce the load carrying capacity and the shear distortion in the core zone. Based on the test results, a calculation model of the shear force–strain envelope curve of RC connections that integrates the effects of the inhomogeneous temperature field distribution and axial compression ratio was established.

Experimental investigation of the seismic resistance of RC beam–column connections after freeze–thaw cycle treatment

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Seismic behavior of frost-damaged squat RC shear walls under artificial climate environment: a further experimental research

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Study on the mechanical performance of TRC-strengthened RC beams under a salt freeze–thaw environment

Coupled Thermo‐hydro‐mechanical Analysis of Reinforced Concrete Beams under the Effect of Frost Damage and Sustained Load

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load

Simulation and Prediction of Seismic Behaviors for RC Columns under Freeze–thaw Cycles

Eccentric compressive behaviors of RC columns after freeze-thaw cycles

STUDY OF THE SHEAR BEHAVIORS OF RC BEAMS AFTER FREEZE-THAW CYCLES

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

Effect of freeze-thaw cycles on tensile properties of CFRP, bond behavior of CFRP-concrete, and flexural performance of CFRP-strengthened concrete beams

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Evaluation of fracture behavior of high-strength hydraulic concrete damaged by freeze-thaw cycle test

Mechanical properties of CFRP and shrinkage compensating concrete actively confined and strengthened short columns under freeze–thaw cycles

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Structural behaviors evaluation of the frost damage for RC beams founded on non-coordinated deformation from pores

The effect of freeze–thaw cycles on flexural behaviour of FRP-reinforced ECC beams

Experimental and numerical research on cyclic tensile performance of high-strength hydraulic concrete subjected to freeze-thaw damage