Abstract:Formation of ice plays a key role in the behavior of concrete materials at low temperatures in cold and wet regions. The internal stresses generated during the freeze-thaw process could cause serious damage and other durability problems to concrete structures. However, just concerning the stage while the temperature is below 0 degrees C, ice could reduce the stress concentration in the porous matrix by filling the capillary pores and result in a significant increase of elastic modulus and strength, which is usually beneficial for concrete under mechanical loads (either static or fatigue). Meanwhile, pore pressures at low temperatures will also play an important role in either accelerating or delaying the microcracking. In order to establish a mesoscale approach [which usually treats concrete as a composition of coarse aggregate, mortar, and interfacial transition zone (ITZ) between them] based on the rigid-body spring method (RBSM) for the aforementioned issues, in the first stage, the ice-strengthened elastic properties of the mortar are estimated based on multiscale continuous micromechanics. Then a mesoscale model based on RBSM is developed to simulate the nonlinear mechanical behavior under uniaxial compression, tension, and splitting for concrete, in which the ice-strengthened elastic properties in mortar and ITZ, as well as the pore pressures caused by ice formation, are taken into consideration. The range and tendency of the simulated strength values agree well with experimental data. (C) 2017 American Society of Civil Engineers.

RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers

RBSM-based Mesoscale Study of Frost Deterioration for Recycled Concrete Considering Air-Entrainment in Old and New Mortar

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

Mesoscale Simulation of Bond Behaviors Between Concrete and Reinforcement under the Effect of Frost Damage with Axisymmetric Rigid Body Spring Model

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Coupled Thermo‐hydro‐mechanical Analysis of Reinforced Concrete Beams under the Effect of Frost Damage and Sustained Load

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Mesoscale Simulation of Influence of Frost Damage on Mechanical Properties of Concrete

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Prediction of Progressive Frost Damage Development of Concrete Using Machine-Learning Algorithms

Multi-scale Computational Modeling on the Equivalent Element Method for Freeze-thaw Damage of Concrete

Data-Based Statistical Analysis of Laboratory Experiments on Concrete Frost Damage and Its Implications on Service Life Prediction

Numerical investigation and design of reinforced concrete beams with non-uniform frost damage on the compression and tension sides

Structural behaviors evaluation of the frost damage for RC beams founded on non-coordinated deformation from pores

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Experimental Examination of Electrical Characteristics for Portland Cement Mortar Frost Damage Evaluation

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete