Abstract:In order to reverse the trend of increasing carbon dioxide (CO2) emissions, the development of efficient and economical CO2 trapping agents is an urgent necessity for the sustainable development of industry. In this paper, hierarchical porous hydroxyl aluminum oxide (AlOOH) hollow microspheres with controllable structure and morphology were prepared by conventional hydrothermal synthesis using malonic acid as a structure guiding agent. Then, potassium carbonate (K2CO3) based adsorbents were prepared using AlOOH hollow microspheres as supports, and their CO2 trapping performance was assessed by simulating industrial flue gas flow in a fixed bed. The results show that the loading of K2CO3, the pore structure, and the surface basic site of the adsorbent have a significant influence on the trapping performance of CO2. Among the prepared K2CO3/AlOOH adsorbents, 30 wt% K2CO3/AlOOH adsorbent has the best CO2 capture ability, which is about 2.15 times higher than that of K2CO3/C–Al2O3 adsorbent prepared from commercial alumina (C–Al2O3). There may be two explanations for this. Firstly, it may be due to the nanostructured shell and hierarchical porous structure of the adsorbent, which reduces the intra-particle diffusion resistance of CO2, and secondly, it may be due to the suitable surface basic sites of the adsorbent. In addition, the adsorbent was regenerated at 120 °C after trapping CO2, and then CO2 was captured in a cycle. It was found that the CO2 capture capability of the adsorbent did not decrease significantly after 10 cycles. In this work, an excellent technique for preparing porous honeycomb adsorbents with suitable surface basic sites has been devised, which provides a creative strategy for capturing and utilizing CO2.

Preparation method of spherical calcium based CO2 adsorbent

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Preparation of MgO-coated Nano CaO Using Adsorption Phase Reaction Technique for CO2sorption

Preparation of cage-like nano-CaCO3 hollow spheres for enhanced CO2 sorption

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Calcination–carbonation Durability of Nano CaCO3 Doped with Li2SO4

A basic study on the nano CaO-based CO2 adsorbents in FFB for CO2 capture

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

The Effect of CaO Content on Sorption Performance of Nano CaO Based CO2 Adsorbent

Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent

Facile Preparation of Porous CaMgAl Hydrotalcite-Like Derived Mixed Oxides through Alkaline Etching of KOH for CO2 Capture

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Experimental Analysis and Evaluation on the CO2 Adsorption Performance of Modified CaO-based Adsorbents Doped with High Aluminum Cement in Different Reactors

Kilogram-scale production and pelletization of Al-promoted CaO-based sorbent for CO2 capture

Enhanced cyclic stability of CO 2 adsorption capacity of CaO-based sorbents using La 2 O 3 or Ca 12 Al 14 O 33 as additives

Green preparation of CaO-based CO 2 adsorbent by calcium-induced hydrogenation of shell wastes at room/moderate temperature

Study of calcium-based CO2 sorbent with high cycling stability derived from steel slag and its anti-sintering mechanism

Hierarchical porous AlOOH hollow microspheres for efficient CO2 capture