Abstract:Recent developments in manufacturing require holes on composite materials, especially on the carbon fiber reinforced polymer (CFRP) with smooth hole periphery, low delamination, burr formation, taper, better circularity, and a high processing speed. Its non-conductive surface (epoxy layering) limits its machining through electrical discharge machining (EDM). To overcome this limitation, an aluminum fixture has been designed to guide the copper electrode of EDM for producing holes on a CFRP sheet of 1 mm thickness at low machining complexity, cost, time, delamination, burr in hole periphery and without affecting the material’s surface quality and performance. Even components with high geometrical complexity can also be drilled through this approach. Here, a multi-quality analysis called grey relational analysis is developed for examining the hole quality attributes, considering peak current, pulse on and off time, and flushing pressure as input parameters. This approach points out the optimum factor level setting and critical parameters (pulse-on time and peak current) that regulate the hole attributes (entrance and exit diameter, circularity, taper, material removal, and tool wear rate). An artificial neural network model has been designed and trained through experimental data sets. This model can also be adopted during the determination of hole quality attributes when the parameter settings are beyond a defined boundary, as the regression analysis value is very close to 1, and model performance is 4.99e-10. Peak current = 4 A, pulse-on time = 25 μs, pulse-off time=25 μs, and flushing pressure = 0.6 MPa were the optimum drilling parameters. In the initial hole, average burr length is 391.75 μm, and delamination of 539.3 μm is noticed. But burr formation is very negligible with delamination of 350.7 μm being observed with uniform circularity (0.979), low taper angle (−0.81354°), and TWR (0.000069 g/min) under optimum drilling conditions through this drilling approach.

Experimental investigations of electromagnetic punching process in CFRP laminate

Experimental investigation on electromagnetic punching process of hybrid CFRP/Al stacks under different discharge energies

Effects of Specialized Drill Bits on Hoe Defects of CFRP Laminates

Comparative investigations on machinability and surface integrity of CFRP plate by picosecond laser vs laser induced plasma micro-drilling

Study on helical hole-making process of CFRP/Al alloy laminated materials

Experimental study on the hole machining process of a newly developed AFRP/Al/AFRP co-cured material: A comparative analysis of milling and drilling

Helical milling for making holes on carbon fiber-reinforced polymer

Experimental research on ultrasonic vibration countersinking process of CFRP composite laminates

Experimental investigation on drilling force and hole quality when drilling of T800s/250F CFRP laminate

Experimental study on CFRP drilling with the picosecond laser "double rotation" cutting technique

Hole quality in longitudinal–torsional coupled ultrasonic vibration assisted drilling of carbon fiber reinforced plastics

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Formation mechanism of CFRP pipe concave drilling defects

Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels

Study on Damage Evaluation and Machinability of UD-CFRP for the Orthogonal Cutting Operation Using Scanning Acoustic Microscopy and the Finite Element Method

CFRP composite drilling through electrical discharge machining using aluminum as fixture plate

Drill-milling process and novel drill-milling tool for making a hole on carbon fiber–reinforced plastics

Machinability Of Drilling T700/Lt-03a Carbon Fiber Reinforced Plastic (Cfrp) Composite Laminates Using Candle Stick Drill And Multi-Facet Drill

Investigation of Heat Accumulation in Femtosecond Laser Drilling of Carbon Fiber-Reinforced Polymer

Experimental Evaluation of Cutting Quality of Carbon Fibre Reinforced Polymer with Pulsed Laser

Delamination in rotary ultrasonic machining of CFRP composites: finite element analysis and experimental implementation