Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Current Status of Metallurgical Quality and Fatigue Performance of Rolling Bearing Steel and Development Direction of High-End Bearing Steel

Fatigue Crack Initiation and Propagation at High Temperature of New-Generation Bearing Steel

Very high-cycle fatigue performance of high carbon-chromium bearing steels with different metallurgical qualities

Development of and Perspective on High-Performance Nanostructured Bainitic Bearing Steel

Effects of heat treatment on fatigue properties of double vacuum smelting high‐carbon chromium bearing steel

Effect of Primary Carbides on Rolling Contact Fatigue Behaviors of M50 Bearing Steel

Investigation on Rolling Contact Fatigue of 55 Medium-Carbon Steel

Advance on surface finishing technology of precision bearing cylindrical rollers

Influence of carbon layer hardness characteristics on RCF performance of carburized bearing steel and optimization of heat treatment process

Microstructural-based analysis of the unexpected differences in rolling contact fatigue behavior between SAE52100 and SAE4320

Comparing Friction Behavior and Mechanism of Three Generation Bearing Steel (gcr15, M50, CSS-42L) Paired Silicon Nitride under Ester Oil Lubrication from Room Temperature to 350 °C

Atomic-Scale Insights into Damage Mechanisms of GGr15 Bearing Steel Under Cyclic Shear Fatigue

Fatigue and recrystallization evolution of carbide-free bainitic layer under high-stress rolling sliding contact

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

The Effect of Cold Ring Rolling on the Heat Treatment Microstructure and Wear Resistance of GCr15 Bearing Steel

Preliminary Research on Response of GCr15 Bearing Steel under Cyclic Compression

Distinguishing effect of turning and grinding on the surface integrity and fatigue performance of ultra-high strength steel

Effect of Hot Rolling on Microstructural Evolution and Wear Behaviors of G20CrNi2MoA Bearing Steel

Research status of inclusions in bearing steel and discussion on non-alloy deoxidation process

Investigation on Microstructure and Fretting Wear Properties of GCr15 Bearing Steel Modified by Fine Particle Bombardment