Abstract:C and Mo in the form of solid solution atom or compound phase is distributed in CoCrFeMnNi high entropy alloy (HEA), which have the effects of solution strengthening or second phase strengthening. CoCrFeMnNi–Mo5C0.5 HEA were prepared by adding C and Mo elements to CoCrFeMnNi HEA, and then which heat treatment were carried out by furnace-cooling, air-cooling and water-cooling respectively. the microstructure and phase composition of as-cast or heat treated CoCrFeMnNi–Mo5C0.5 HEA were examined by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD), the mechanical properties of as-cast or heat treated CoCrFeMnNi–Mo5C0.5 HEA were tested by the tensile test and hardness test, and the effects of heat treatment cooling methods on precipitated second phase and mechanical properties of CoCrFeMnNi–Mo5C0.5 HEA were investigated. The results show that precipitated second phase in CoCrFeMnNi–Mo5C0.5 HEA is MC phase, which is rich in Mo, Cr and C elements. With change of heat treatment cooling methods from furnace-cooling, air-cooling to water-cooling respectively, heat treatment cooling rate is increased. With increase of heat treatment cooling rate, the amount and size of precipitated second phase are all decreases, and the position of second phase precipitation changes from grain boundaries to intragranular. The tensile strength and elongation of heat treatment water-cooled CoCrFeMnNi–Mo5C0.5 HEA are 739 MPa and 41% respectively, which are realizes the simultaneous increased of strength and plasticity. With increase of heat treatment cooling rate, the hardness of CoCrFeMnNi–Mo5C0.5 HEA decreases, the uniform plastic deformation and the elongation are all increases, and the plasticity increase. The fractures of as-cast, heat treatment furnace-cooled, air-cooled and water-cooled CoCrFeMnNi–Mo5C0.5 HEA are all brittle fracture with cleavage characteristics, and the plastic deformation occurs mainly in the uniform plastic deformation stage. The fracture mode of as-cast CoCrFeMnNi–Mo5C0.5 HEA is intergranular fracture, the fracture mode of heat treatment furnace-cooled, air-cooled and water-cooled CoCrFeMnNi–Mo5C0.5 HEA are all transgranular fracture.

Precipitation Σ Phase Evoluation and Mechanical Properties of (cocrfemnni)97.02mo2.98 High Entropy Alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effect of Heat Treatment on Microstructure and Properties of CoCrFeMnNi-5％Mo High Entropy Alloy

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effects of Mo Element on Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys

Effects of heat treatment cooling methods on precipitated phase and mechanical properties of CoCrFeMnNi–Mo5C0.5 high entropy alloy

Effect of annealing temperature on the structure and properties of FeCoCrNiMo high-entropy alloy

Phase stability and strengthening behavior of as-annealed Co30Cr30Fe17Ni17Mo6 high entropy alloy at room and low temperatures

Precipitation Phase and Twins Strengthening Behaviors of As-Cast Non-Equiatomic CoCrFeNiMo High Entropy Alloys

Microstructure Evolution and Mechanical Properties of NiAlCrFeMo High Entropy Superalloy after Different Annealing Treatment

Microstructure Evolution and Strengthening Mechanism of AlCrFe2NiCuMox High Entropy Alloys

Phase transformation and strengthening of the gas-atomized FeCoCrNiMo0.5Al1.3 high-entropy alloy powder during annealing

Experimental and Theoretical Investigations on the Phase Stability and Mechanical Properties of Cr7Mn25Co9Ni23Cu36 High-Entropy Alloy

A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures

Ultra-small-angle neutron scattering study on temperature-dependent precipitate evolution in CoCrFeNiMo0.3 high entropy alloy

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al0.6CoFeNi2V0.5 High Entropy Alloy

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

Microstructures and mechanical properties of the precipitation strengthened Al0.4Cr0.7FexNi2V0.2 high entropy alloys

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment