Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Research on the Relationship Between Ideality Factor and Number of Units of Gan-Based High Voltage Light-Emitting Diode

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Current Spreading in Gan-Based Light-Emitting Diodes

Study of Predicting the Performance of I-V Curves Through Photoluminescence Spectral Characteristics

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Optimizing InGaN Micro-LED Efficiency: Investigating the Internal Quantum Efficiency and Ideality Factor Connection

High-output power GaN-LED based on surface plasmon enhancement

Current–voltage characteristics of InGaN/GaN blue light-emitting diodes investigated by photovoltaic parameters

Dependence of Reliability of GaN LEDs on Their Junction Temperatures and Ideal Factors

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

A Simulation Study on the Enhancement of the Efficiency of GaN-based Blue Light-Emitting Diodes at Low Current Density for Micro-Led Applications

Temperature-dependent study on AlGaN-based deep ultraviolet light-emitting diode for the origin of high ideality factor

Limiting factors of GaN-on-GaN LED

Influence of In content in InGaN barriers on crystalline quality and carrier transport of GaN-based light-emitting diodes

Exploring an InGaN Micro-LED structure for optimum IQE operating on low current condition through simulation study

Study on Optical Properties and Internal Quantum Efficiency Measurement of GaN-based Green LEDs

Study on Light Extraction Efficiency of GaN-based Light-emitting Diode Chips

Analysis of the Quantum Efficiency of Gainn/Gan Light Emitting Diodes in the Range of 390-580 Nm

High Light Extracting Efficiency of Gan-Based Led Based on Photonic Crystal

Influence of Optical/Electrical Excitating Style on the Deality Factor of AlGaInP and GaN-based LEDs