Abstract:We have presented herein the results of microstructure, surface magnetic domains (SMDs), and giant magneto-impedance (GMI) effect of melt-extracted Co68.15Fe4.35Si12.25B11.25Nb2Cu2 amorphous wires for the first time employed by using a cryogenic Joule annealing (CJA) technique with large DC current amplitude. Compared with the conventional JA method, experimental results indicate that the maximum GMI ratio [Delta Z/Z(0)](max) achieves up to 425% at 8.1 MHz with monotonic increase of the axial magnetic field H-ex up to 6.5 Oe for 300 mA (equal to around 1.06 x 10(6) A/dm(-2)) CJA-ed wire, which is about 75% larger than the [Delta Z/Z(0)](max) for the 100 mA (nearly 3.53 x 10(5) A/dm(-2)) JA-ed microwires. The remarkable features of large and linearly sensitive response field (2.5 similar to 6.5 Oe) and the sensitivity of 99.4%/Oe with higher GMI ratio simultaneously make the CJA tailored melt-extracted microwires promising candidate materials for miniaturized GMI sensors. Another interesting result of GMI profiles of 200 mA (appropriately equal to 7.07 x 10(5) A/dm(-2)) CJA-ed wire show a linear response to H-ex (ranging from 10 to 80 Oe or more), this behavior of GMI curves can be explored to fabricate bi-sensor. Large response field proves to originate from the intensive coupling between the radial stress field and the circumferential magnetic field during CJA process. The effect of outer-shell microstructure and complex SMD for 300 mA CJA-ed microwire is attributed to the fact that liquid nitrogen hinders the evolution of circumferential domain structure to some extent and protects the amorphous structure in the shell region. (C) 2014 AIP Publishing LLC.

Static Magnetization and Demagnetizing Field Distribution of the Amorphous Wire in Non-Uniform Applied Field

Analysis of Magnetoimpedance in Amorphous Wire Passing Through A Magnetic Ring

Length Effect on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Influences of Extra Magnets on Giant Magnetoimpedance Effect in Amorphous Wires

Simulation of Magnetic End Effect of Amorphous Wires

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Exploring Stress-Dependent Impedance Behavior Via Magnetization Dynamics in Amorphous Magnetic Fibers in High Frequency: Experimental and Modeling

A New Magnetic Sensor Based on Giant Magneto- impedance Effect of Fe-based Amorphous Wire

Collective Length Effect on the Magnetostatic Properties of Arrays of Glass-Coated Amorphous Alloy Microwires

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Comparative Study on Magnetic Properties and Microstructure of As-prepared and Alternating Current Joule Annealed Wires

Temperature Dependences of the High-Frequency Electrical Impedance of Cobalt-Based Amorphous Wires with an Inhomogeneous Magnetic Structure

Large GMI effect in Co-rich amorphous wire by tensile stress

Modeling of torsion stress giant magnetoimpedance in amorphous wires with negative magnetostriction

Analysis and Simulation on Dielectric Properties of Glass-Coated Magnetic Alloy Microwires

Surface microstructural design to improve mechanical and giant magneto-impedance properties of melt-extracted CoFe-based amorphous wires

A Theoretical Model Based on Domain Transition Structure for Transition Gmi Behavior in High Frequency

Influence of Tensile Stress on the Circular Magnetization and Eddy-current Anomaly in Fe-rich Soft Wire

Effect of Tension Annealing on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire