Abstract:The anisotropic ductile fracture behavior of a stainless steel is investigated using a combination of experiments and analysis. The material is SS-304L, an austenitic, low-carbon stainless steel, received in the form of tubes of 2.38 mm dia. and 0.15 mm thickness. The tubes are inflated under volume control in a custom apparatus. At the same time, the axial force on the tubes is kept proportional to the pressure induced by the inflation. This leads to quasi-proportional stress paths in the meridional-hoop engineering stress space. A total of 15 discrete paths are successfully tested. Stereo-type Digital Image Correlation is used to measure the strains. In every case, the tubes develop a series of instabilities before bursting. The failure is oriented along the meridional or the hoop direction of the tube, depending on which stress is greater. A mild plastic anisotropy is detected in these experiments. Hence these results are then used for calibrating the anisotropic yield criterion Yld2004-3D. This is introduced in a finite element model of the experiments, which includes a thickness imperfection designed to capture the two failure orientations observed in the experiments. The numerical model using the Yld2004-3D criterion reproduces the experiments well, e.g., it captures the experimental stress-strain and induced strain paths better than von Mises. It is then used to probe the conditions at the onset of fracture (hybrid method). It is found that most paths lead to essentially proportional loading during deformation. A significant anisotropy in the fracture behavior is detected, with the meridional-stress-dominated paths being able to develop much higher strains than the hoop-dominated ones. These results are then captured by the DF2016 ductile fracture criterion, modified to use the anisotropic yield criterion Yld91. The proposed criterion is flexible enough to represent the fracture anisotropy very well, without being unnecessarily complex. The fracture forming limit curve (i.e., the fracture envelope in strain space) predicted by the DF2016/Yld91 model is also found to be very close to the experiments. The results and findings of this work help establish a framework to reliably design components and processes when significant fracture anisotropy is expected.

Experiments on Low–Cycle Ductile Damage and Failure Under Biaxial Loading Conditions

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Biaxial Testing of Thin Metal Sheets under Non-Proportional Loading Conditions

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Stress state dependence of ductile damage and fracture behavior: Experiments and numerical simulations

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens

Ductile damage evolution under triaxial state of stress: theory and experiments

Experimental techniques for ductile damage characterisation

Biaxial Experiments and Numerical Analysis on Stress-State-Dependent Damage and Failure Behavior of the Anisotropic Aluminum Alloy EN AW-2017A

Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage

Modeling of Ductile Damage and Fracture Behavior Based on Different Micromechanisms

Analysis of ductile damage and fracture under reverse loading

Damage and fracture initiation under shear and compression stress states in the aluminum alloy EN AW6082-T6

A ductile damage criterion at various stress triaxialities

An Investigation of Testing Methods on the Biaxial Mechanical Behaviors of Anisotropic Materials

Deformation and Damage Behavior of a 1Cr-Cast Steel Under Multiaxial Loading at Elevated Temperatures

Modeling ductile damage under fully reversed cycling

Macroscopic damage laws based on analysis of microscopic unit cells

Anisotropic Ductile Fracture Of A Stainless Steel Under Biaxial Loading: Experiments And Predictions

Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation