Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Enhancement of Qm in CuO-doped Compositionally Optimized Li/Ta-modified (na,k)nbo3 Lead-Free Piezoceramics

Processing And Piezoelectric Properties Of (Na0.5k0.5)(0.96)Li-0.04(Ta0.1nb0.9)(1-X)Cuxo3-3x/2 Lead-Free Ceramics

Processing and Piezoelectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)<sub>0.96</sub>Li<sub>0.04</sub>(Ta<sub>0.1</sub>Nb<sub>0.9</sub>)<sub>1−x</sub>Cu<sub>x</sub>O<sub>3−3x/2</sub> Lead-Free Ceramics

STUCTURE AND ELECTRICAL PROPERTIES OF Cu-DODED(K0.5Na0.5)NbO3-(Bi0.5Na0.5)TiO3-LiSbO3-NaTaO3 LEAD-FREE PIEZOELECTRIC CERAMICS

Microstructure and Piezoelectric Properties of CuO-doped 0.95(k0.5na0.5)nbo3–0.05li(nb0.5sb0.5)o3 Lead-Free Ceramics

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

Microstructure, electrical properties and processing dependence of CuO modified (Na0 52K0.48)NbO3 ceramics

High and Frequency-Insensitive Converse Piezoelectric Coefficient Obtained in Agsbo3-Modified (li, K, Na)(Nb,Ta)O-3 Lead-Free Piezoceramics

Further Enhancing Piezoelectric Properties by Adding MnO2 in AgSbO3‐Modified (li,k,na)(nb,ta)o3 Lead‐Free Piezoceramics

High Qm values and humidity effect on the electrical properties of (K, Na)NbO3 lead-free piezoceramics doped with B2O3–CuO mixed oxides

Textured Potassium Sodium Niobate Lead-Free Ceramics with High d33 and Qm for Meeting High-Power Applications

Effects of the Addition of Li0.8Ni0.2Nb0.96O3 on the Structure and Electrical Properties of K0.48Na0.52NbO3 Lead-Free Piezoceramics

Structural and Electric Properties of MnO2-Doped KNN-LT Lead-Free Piezoelectric Ceramics

Enhanced piezoelectric properties in 0.96(K0.48Na0.52)(Nb1−xTax)O3–0.04(Bi0.5Ag0.5)ZrO3 lead-free ceramics

Theoretical Prediction and Experimental Validation of Enhancing the Piezoelectric Properties of (K, Na)NbO3 Modified by Li, Ta, and Sb According to the Linear Combination Rule

Effects of LiBiO2 addition on the microstructure and piezoelectric properties of CuO‐doped PNN–PZT ceramics

Enhanced Dielectric and Piezoelectric Properties in Litao3-Doped Lead-Free (k,na)nbo3 Ceramics by Optimizing Sintering Temperature

Microstructure and electrical properties of CuO-doped K0.5Na0.5NbO3-based single crystals with low dielectric loss

Structural and Electric Properties of MnO<sub>2</sub>-Doped KNN-LT Lead-Free Piezoelectric Ceramics