Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Theoretical Prediction and Experimental Validation of Enhancing the Piezoelectric Properties of (K, Na)NbO3 Modified by Li, Ta, and Sb According to the Linear Combination Rule

Polymorphic phase transition and enhanced piezoelectric properties of LiTaO<sub>3</sub>-modified (Na<sub>0.52</sub>K<sub>0.48</sub>) (Nb<sub>0.93</sub>Sb<sub>0.07</sub>)O<sub>3</sub>lead-free ceramics

Polymorphic Phase Transition And Enhanced Piezoelectric Properties Of Litao3-Modified (Na0.52k0.48) (Nb0.93sb0.07)O-3 Lead-Free Ceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

High and Frequency-Insensitive Converse Piezoelectric Coefficient Obtained in Agsbo3-Modified (li, K, Na)(Nb,Ta)O-3 Lead-Free Piezoceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Effects of the Co-Addition of Li, Sb, Ta on the Phase Structure and Piezoelectric Properties of (Na, K) NbO3 Lead Free Piezoceramics

Phase Structure and Electrical Properties of (Li,ta)-Doped (k,na)nbo3 Lead-Free Piezoceramics in the Vicinity of Na/K = 50/50

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid

Comprehensive Investigation of Elastic and Electrical Properties of Li/Ta-modified (k,na)nbo3 Lead-Free Piezoceramics

Effects of the Addition of Li0.8Ni0.2Nb0.96O3 on the Structure and Electrical Properties of K0.48Na0.52NbO3 Lead-Free Piezoceramics

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Phase Structure and Electrical Properties of Lead-Free (0.96Bi_(0.5)Na_(0.5)TiO_3~-0.04BaTiO_3)-(0.98K_(0.5)Na_(0.5)NbO_3~-0.02LiTaO_3) Piezoelectric Ceramics

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Combined Effects of Li Content and Sintering Temperature on Polymorphic Phase Boundary and Electrical Properties of Li/Ta Co-Doped (na, K)NbO 3 Lead-Free Piezoceramics

Enhanced Piezoelectric Properties and Thermal Stability in the (K0.5Na0.5)NbO3:ZnO Lead‐Free Piezoelectric Composites

Effect of changing Na/K ratio on structure and electrical properties of (Na xK y) (Nb 0.885Sb 0.08)-0. 035LiTaO 3 lead-free piezoelectric ceramics

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Domain Engineering of Lead‐Free Li‐Modified (k,na)nbo3 Polycrystals with Highly Enhanced Piezoelectricity

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere