Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Optimal Design of a Novel Non-Isometric Helically Coiled Recuperator for Joule–Thomson Cryocoolers

Thermodynamic optimization analysis of a tube-in-tube helically coiled heat exchanger for Joule-Thomson refrigerators

Thermodynamic Optimization of the Recuperative Heat Exchanger for Joule–Thomson Cryocoolers Using Response Surface Methodology

Optimization of Miniature Joule-Thomson Cryocooler with Non-Isometric Recuperator on Transient Characteristics

Optimal Design of Miniature Joule-Thomson Cryocooler

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

A new optimization concept of the recuperator based on Hampson-type miniature cryocoolers

Numerically Investigated on the Transient Performance of Fast Cool-Down J-T Cryocoolers with Non-Isometric Structure

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Numerical and Experimental Study on a Tube-in-tube Heat Exchanger Working at Liquid-Hydrogen Temperature with a Large Temperature Span

Modeling and Optimization of a Novel Heat Recovery Design for Thermoelastic Cooling Systems

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Numerical Modeling of Recuperative Cryogenic Matrix Heat Exchangers and the Experimental Validation

Design and Performance Analysis of an Ejector-Equipped Joule–Thomson Cryocooler

Energy, conventional exergy and advanced exergy analysis of cryogenic recuperative organic rankine cycle

Numerical Study and Optimization of Thermoelectric-Hydraulic Performance of a Novel Thermoelectric Generator Integrated Recuperator

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Optimal Design of the First Stage of the Plate-Fin Heat Exchanger for the EAST Cryogenic System

Modelling of elastocaloric regenerators with enhanced heat transfer structures

Optimal design of the first stage of plate-fin heat exchanger for 5 kW@4.5 K cryogenic system

Optimization Design and Comparative Analysis of Enhanced Heat Transfer and Anti-Vibration Performance of Twisted-Elliptic-Tube Heat Exchanger: A Case Study