Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Optimization Design and Comparative Analysis of Enhanced Heat Transfer and Anti-Vibration Performance of Twisted-Elliptic-Tube Heat Exchanger: A Case Study

Comparative research on the heat transfer efficiency of evaporators with different structures used in a large quick-freeze plant

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Numerical investigation of thermal-hydraulic characteristics in cross-flow heat exchangers with different twisted oval tubes

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Natural convective heat transfer analysis of a vertical tapered inner annulus tube with dual inverted frusto-conical turbulator using CFD

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Analysis and optimization of heat transfer performance of multi-stage tower-type direct contact heat exchangers in waste heat recovery

An optimization of microtube heat exchangers for supercritical CO2 cooling based on numerical and theoretical analysis

Investigation on the two-phase flow and heat transfer behaviors in a new central uniform dispersion-type heat exchanger

Numerical investigation of the enhanced heat transfer characteristics in dimpled enhanced tube to shell-and-tube lube oil heat exchangers

Numerical study of the cold finned-tube bundle heat exchanger under natural convection for a novel passive displacement cooling system

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes

Numerical investigation of convective heat transfer enhancement by a combination of vortex generator and in-tube inserts

Experimental Study of Inlet-outlet-tube Position of Heat Exchanger Module for Loader

A COMPREHENSIVE REVIEW STUDY ON HEAT TRANSFER IMPROVEMENT TECHNIQUES WITHIN TWISTED TUBES