Abstract:Additive manufacturing (AM) has tremendous potential to produce high-power-density heat exchangers. However, manufacturing AM-heat exchangers at a competitive cost impedes their commercial adoption. In this paper, a novel design of an AM counter flow pin–fin compact recuperator, and its manufacturing costs when using laser powder bed fusion method, are presented. The compact recuperator, which can operate at a high temperature of 800 °C, a high fluid pressure (250 bar) on the cold side and withstand a differential pressure of 170 bars across the fluid streams, as seen in supercritical carbon dioxide power cycles, is designed for a lifetime of 40,000 h. Numerical models to predict the thermo-fluidic performance, and a simplified mechanical model based on plate theory to predict the mechanical stresses, of the recuperator are presented. The recuperator's thermal performance and compactness are studied, and its manufacturability is evaluated via a multi-objective techno-economic optimization. The optimization process considers thermo-fluidic, structural, and manufacturing constraints. The recuperator was fabricated using Haynes 282, and the printability of the design features using a laser-powder-bed-fusion machine is demonstrated. The choice of employing two different AM machines, with different build plate dimensions, number of lasers, and design constraints, on the recuperator's cost/unit, cost/UA, and cost/kW-th o are examined. It is observed that the cost/UA and cost/kW-th decrease exponentially from 13,839 USD-K/kW to 1,994 USD-K/kW and from 80 USD/kW-th to 18 USD/kW-th, respectively, with the size and thermal rating of the recuperator. The exponential decrease in cost/UA and cost/kW-th with increase in power rating opens the possibility of manufacturing large-scale additively manufactured recuperators at a competitive cost. The recuperator, including headers, can achieve a maximum volumetric heat density of 200 MW/m3. The optimization framework can be used to obtain optimal pin-array heat exchanger dimensions for other applications and materials using laser powder bed fusion method.

A new optimization concept of the recuperator based on Hampson-type miniature cryocoolers

Optimal Design of a Novel Non-Isometric Helically Coiled Recuperator for Joule–Thomson Cryocoolers

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Initial Ratio Optimization for the Ejector Cooling System with Thermal Pumping Effect (ECSTPE)

Optimization of Miniature Joule-Thomson Cryocooler with Non-Isometric Recuperator on Transient Characteristics

Thermodynamic Optimization of the Recuperative Heat Exchanger for Joule–Thomson Cryocoolers Using Response Surface Methodology

Numerical Study and Optimization of Thermoelectric-Hydraulic Performance of a Novel Thermoelectric Generator Integrated Recuperator

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

An investigation of the mixing position in the recuperators on the performance of an auto-cascade refrigerator operating with a rectifying column

Experimental Study of a New Ejector-Absorption Refrigeration Cycle Driven by Multi-Heat Sources

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Numerical and Experimental Study on a Tube-in-tube Heat Exchanger Working at Liquid-Hydrogen Temperature with a Large Temperature Span

Three-dimensional shape optimization of fins in a printed circuit recuperator using S-CO2 as the heat-transfer fluid

Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications

Design and Optimization of a Novel High Temperature Heat Exchanger for Waste Heat Cascade Recovery from Exhaust Flue Gases

Heat Current Method for Analysis and Optimization of Heat Recovery-Based Power Generation Systems

Numerical Modeling of Recuperative Cryogenic Matrix Heat Exchangers and the Experimental Validation

Thermal-hydraulic performance of compressed humid air flowing in a recuperator

Performance evaluation of heater and recuperator in Brayton cycles for power and energy storage

Modeling and Optimization of a Novel Heat Recovery Design for Thermoelastic Cooling Systems