Abstract:A simple tactic for fabricating a Li‐Sr‐N (LSN) composite anode tailored for solid‐state batteries is proposed via the reaction between Li and Sr3N2. The interfacial contact with Li6.5La3Zr1.5Ta0.5O12 (LLZTO) pellet is greatly enhanced via LSN composite, enabling a homogeneous Li+ flux and electric field distribution during the Li plating/stripping process. Garnet solid state electrolytes (SSEs) have emerged as propitious candidates for solid‐state batteries (SSBs) with exceptional ionic conductivity and excellent (electro)chemical stability. However, the Li|garnet interface contact deterioration still remains a major challenge resulting in Li dendrite propagation. Herein, a method is proposed to strengthen the adhesion of garnet SSE and Li by incorporating Sr3N2 into the Li metal. Density functional theory (DFT) calculations reveal that the interfacial formation energy of Li|garnet is decreased by the obtained Li‐Sr‐N (LSN) composite, which can enable a shift from poor contact to intimate bonding at the Li|garnet interface and a homogenous Li+ flux as well as electric field distribution. Simultaneously, the produced Li3N and LiSrN, which are known for their strong Li adsorption affinity and rapid Li+ transfer kinetics, actively govern the Li plating process. Thereby this rational design brings a notable reduction in interfacial impedance (4.5 Ω cm2), along with the increased critical current density (1.3 mA cm−2) and enhanced cycle stability (1200 h at 0.3 mA cm−2). Furthermore, The LFP|garnet|LSN full cell has demonstrated remarkable cycling performance (95.9% capacity retention after 200 cycles at 1 C) and favorable rate capability (150.2 mAh g−1 at 0.1 C and 134.9 mAh g−1 at 1 C). The research provides a new sight into lithium modification that can restrain Li|garnet interface deterioration and lay the groundwork for future advancements in high‐performance garnet‐ based SSBs.

Li 2 CO 3 -affiliative mechanism for air-accessible interface engineering of garnet electrolyte via facile liquid metal painting

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

Interfacial Modification of Li/Garnet Electrolyte by a Lithiophilic and Breathing Interlayer

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate-Temperature Conversion Chemistry

Negating Interfacial Impedance in Garnet-Based Solid-State Li Metal Batteries

One-step Fabrication of Garnet Solid Electrolyte with Integrated Lithiophilic Surface

Garnet-Based Solid Li-Metal Batteries Operable under High External Pressure with HCOOH-Induced Electron-Blocking and Lithiophilic Interlayer

Molten Salt Driven Conversion Reaction Enabling Lithiophilic and Air‐Stable Garnet Surface for Solid‐State Lithium Batteries

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

Transformation of Undesired Li 2 CO 3 into Lithiophilic Layer Via Double Replacement Reaction for Garnet Electrolyte Engineering

In Situ Lithiophilic Layer from H+/Li+ Exchange on Garnet Surface for the Stable Lithium-Solid Electrolyte Interface

Li3N-Modified Garnet Electrolyte for All-Solid-State Lithium Metal Batteries Operated at 40 °C.

An <i>in situ</i>-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

Constructing a Li2O/LiZn Mixed Ionic Electron Conductive Layer by Ultrasonic Spraying to Enhance Li/Garnet Solid Electrolyte Interface Stability for Solid-State Batteries.

Drawing a Soft Interface: An Effective Interfacial Modification Strategy for Garnet-Type Solid-State Li Batteries

Excellent Li/Garnet Interface Wettability Achieved by Porous Hard Carbon Layer for Solid State Li Metal Battery

Enhanced Cathode/Electrolyte Interface in Solid-state Li-metal Battery based on Garnet-type Electrolyte

An in situ-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries