Abstract:This study delves into the investigation of intermetallic compounds, specifically Al3Ni, Al3Sn, Al2Cu, Ni3Al, and their formation during the alloying additions and heat treatment procedures of Al-4%Cu alloy with the addition of Ni and Sn. After manufacturing, an extensive range of tests, encompassing hardness assessments, SEM and XRD analysis, and optical microscopy, were executed. The introduction of Nickel (Ni) and Tin (Sn) into the base alloy resulted in a gradual and significant enhancement in hardness, with Alloy 3 exhibiting the most remarkable improvement, showcasing a 214.18 % increase in hardness attributed to higher concentrations of Ni and Sn. Then, heat treatment was carried out that encompassed an initial homogenization phase at 400 °C for a duration of 8 h, followed by precise water quenching. Subsequently, controlled aging precipitation was conducted at 150 °C with distinct time intervals. Comparative analyses of the effect of heat treatment on the hardness values revealed substantial improvements whereas base alloy showed a 67.55 % improvement after the heat treatment. On the other hand, Alloy 1, Alloy 2, and Alloy 3 indicated a 73.26 %, 36.03 %, and 31.22 % enhancement of hardness values respectively. The heat treatment process aimed to meticulously explore the intricate influences of Ni and Sn on the age-hardening process, with specific consideration to identifying the optimal aging time. The incorporation of Ni and Sn into the alloys led to the formation of intermetallic compounds, effectively impeding dislocation movement. Remarkably, Alloy 1 with lower Ni and Sn contents exhibited the most favorable response to the heat treatment, demonstrating a substantial 73.26 % increase in hardness at the optimal aging time. SEM images unveiled the formation of finer precipitates resulting from the aging treatment. This study offers valuable insights into the impact of alloying additions and heat treatment on the microstructure and hardness properties of Al-4%Cu alloys, with potential implications in the fabrication of advanced materials.

Investigations on microstructural, mechanical, and tribological properties of Al-Cu-Ni alloy in cast, heat-treated, and strain-softened conditions

Microstructure, Mechanical, and Tribological Relationship in Cu-12Al-Ni Alloy with Respect to the Variation of Ni Content

Investigation of mechanical and tribological behavior of Al-Ni-Co-MWCNT composites prepared by powder metallurgy technique

Influence of Heat Treatment and Composition Variations on Microstructure, Hardness, and Wear Resistance of C 18000 Copper Alloy

Characterization of microstructure and wear behavior of nickel modified Zn-27% Al alloy casting

The effects of solution heat treatment on the microstructure and hardness of an aluminum-4% copper alloy with added nickel and tin

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

Towards high mechanical performance Al–Cu–Mg–Fe–Ni alloy: influence of composition, solution treatment and aged process on microstructural evolution and mechanical properties

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Investigating the various properties of cold sprayed CuAlNi shape memory alloys developed by post annealing process

Microstructure Characteristics and Compressive Properties of NiAl-based Multiphase Alloy During Heat Treatments

Microstructure and Mechanical Properties of Cast Al-Si-Cu-Mg-Ni-Cr Alloys: Effects of Time and Temperature on Two-Stage Solution Treatment and Ageing

Nanoindentation and isothermal compression behaviour of Al–4Cu–Ni composites

Evaluation of Physical and Thermo-Mechanical Behavior of Heat-Treated Novel Nimonic Alloy

Mechanical and electrochemical characterization of CuAlNi alloys

Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-xNi-0.6Fe-0.6Mn alloys

Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting

Microstructure evolution and mechanical behavior of Cu-7Ni-7Al-4Fe-2Mn alloy via a quenching-aging heat treatment

Investigation on Compressive Behavior of Cu-35Ni-15Al Alloy at High Temperatures

Solutionizing Temperature Effect on the Dry Sliding Wear Performance of Al-7Si-0.3Mg-3Ni Hypoeutectic Alloy

Effect of nanoparticle reinforcement and cryogenic treatment on aluminum alloys for enhancement of mechanical and microstructural characteristics-a review