Abstract:The development of high performance metal matrix composites (MMCs) requires understanding the complex effects of heterogeneous microstructure on the mechanical properties and failure mechanisms. Experimental observations [1] indicated that fine reinforcement particles increased the composite strengthen and work hardening capacity. A number of dislocation models [1,2] have been proposed in a few decades to predict the particle size dependence. Recently, Gao et al. [3] proposed a mechanism-based theory of strain gradient plasticity (MSG) to illustrate the plastic strain and strain gradient which is dissimilar to the phenomenological strain gradient plasticity theories [4,5]. Gao and Huang [6] developed a Taylor-based nonlocal theory (TNT) of plasticity to account for the size dependence of plastic deformation on the strengthening of particle reinforced composites. Qu et al. [7] have extended the conventional theory of mechanism-based strain gradient plasticity (CMSG) established from the Taylor dislocation model to explain the effect of quench hardening and account for particle/matrix interface debonding via the cohesive zone model (CZM). The numerical results agree well with Lloyd’s experimental data [1]. Nan and Clarke [8] extended the effective medium approach (EMA) to demonstrate the influence of particle size and size distribution as well as particle fracturing on the deformation behavior of MMCs. Tohgo et al. [9] extended the incremental damage model of the MMCs by introducing the particle size effects using Nan–Clarke’s simple method. This paper presents the development of a 2D microstructure based finite element model to investigate the effect of particle size on the deformation behavior of the SiCp/Al composites. In the simulation, the two-dimensional randomly distributed multiparticles unit cell model is used. For modeling the matrix behavior of the composites, the Taylor-based nonlocal theory of plasticity is used. The model is enhanced by including contribution of interfacial decohesion and particle fracture damage mechanisms. The simulation provides the stress–strain field of composites during tensile deformation, and calculates the stress–strain curves of the composites with different particle size. 2. NUMERICAL METHODS

FINITE ELEMENT ANALYSIS OF THE MECHANICAL PROPERTIES OF POLYETHYLENE COMPOSITE SHIELDING MATERIAL WITH NANO-INCLUSIONS

Experiment and numerical simulation of anti-penetration performance of composite structures

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic

Simulation of the fracture behavior of inclusion-matrix interface for particle reinforced composites

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

Size and Interface Effects on Tensile Strength of Polymers with Nano/Micro Particle Inclusions

The neutron shielding modeling and experimental characteristic in TiB2/Al composites

205 on the Delamination Problem of Particle-Dispersed Composite with Equivalent Inclusion Method

Microstructure and mechanical properties of Bp/Al neutron shielding composites

Evaluation of the Effective Mechanical Properties of a Particle-Reinforced Polymer Composite with Low-Modulus Inclusions

Modeling of mechanical behaviors and interphase properties of polymer/nanodiamond composites for biomedical products

Fabrication of highly thermally conductive and irradiation resistant UHMWPE-based composites for nuclear shielding applications

Electro-magnetic Shielding Effectiveness of Carbon Nanotube Filled Polymer Based Composite

Analysis of Particle-Dispersed Composites Accounting Stochastically for Interfacial Damage

Material Evaluation and Dynamic Powder Deposition Modeling of PEEK/CF Composite for Laser Powder Bed Fusion Process

An enhanced fem model on the deformation behavior of sic / aluminum composites

2D Simulation of Composite Materials Using BEM

A Micromechanical Model for Interpenetrating Multiphase Composites

Designing a boron nitride polyethylene composite for shielding neutrons

Research on B4C/PEEK Composite Material Radiation Shielding