Abstract:An essential aspect of the design of a pebble bed high-temperature gas-cooled reactor (HTGR) is the consideration of heat transfer. A particle-scale heat transfer model was developed based on the previous GPU-DEM numerical model. This model includes the heat conduction of the particles in contact, the radiative heat transfer among particles, and unidirectional convection heat transfer in the flow field. The comparison of the predicted results with the results of the TF-PBEC experiment demonstrates the accuracy of the conduction and radiation modules within the current model. Based on the current model and the porous media model, a numerical study of the natural convection heat transfer in the High-Temperature gas-cooled Reactor-Pebble-bed Module (HTR-PM) after reactor shutdown is performed. This paper systematically introduces the model design, pebble bed generation, flow field calculation, and heat transfer simulation. The results indicate that natural convection contributes to removing residual heat in the reactor core, and a higher pressure leads to better convection heat transfer. At extremely low Reynolds numbers (Re < 10), convection heat transfer is comparable to conduction and radiation, while for pressurized pebble beds (Re = 50-500), convection heat transfer dominates. Furthermore, the influence of different models used to calculate the Nusselt number of the results is compared and analyzed. For most cases, the differences in the temperature distribution of the pebble bed obtained from the different correlations are minor. However, the impact of porosity on the local Nusselt number cannot be ignored in the extremely low Reynolds numbers flows. Overall, the particle-scale heat transfer model can provide more effective reference information for the design and construction of an HTGR.

Analysis of impact of mixing flow on the pebble bed high temperature reactor

Mixing flow mechanism in the pebble bed high temperature gas cooled reactor

Thermal Mixing Performance of Mixing Structure at Reactor Outlet of HTR-PM under Complex Conditions

Performance of Thermal Mixing Structure of HTR-PM Regarding Bypass Flow and Power Effect

Quantitative Analysis of Uncertainty from Pebble Flow in Htr

Investigation on Numerical Simulation for Hot Gas Mixing Structure of HTR-PM by Considering Leakage Flow

ICONE23-1865 NUMERICAL SIMULATION OF HOT GAS MIXING WITH LEAKAGE FLOW AT HTR-PM REACTOR CORE OUTLET

Numerical Investigation of Mass Mixing in the Reactor Core of a Pebble Bed HTGR

Numerical Study of the Effect of Particle Size on Pebble Flow in the HTR-PM

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

Numerical Study of the Effects of Loading Method on Mixing of Two Kinds of Pebbles in HTGR: A GPU-DEM Simulation

Similarity Analysis for Hot Gas Mixing Experiment of Outlet of HTR-PM Reactor Core

DEM simulation of pebble flow in HTR 10 core by phenomenological method

Numerical Study of the Particle-Scale Heat Transfer in the HTR-PM Pebble Bed Based on GPU-DEM

Pebble Flow in the HTR-PM Reactor Core by GPU-DEM Simulation: Effect of Friction

Analysis Of Bypass Effect On A 250 Mw High Temperature Gas-Cooled Reactor

Uncertainty and Sensitivity Analysis of Filling Fraction of Pebble Bed in Pebble Bed Htr

Effect of Discharging Burnup Threshold on Average Discharging Burnup in Pebble Bed HTR

Numerical Investigations of Thermal Mixing Performance of a Hot Gas Mixing Structure in High-Temperature Gas-Cooled Reactor

Research on the Fuel Loading Patterns of the Initial Core in Chinese Pebble-Bed Reactor HTR-PM

Evaluation of Pebble-Bed Homogenized Cross Sections in HTGR Fuel Cycle Simulations