Abstract:The High-Temperature Gas-Cooled Pebble Bed Reactor (HTG-PBR) is notable in the advanced reactor realm for its online refueling capabilities and inherent safety features. However, the multiphysics coupling nature of HTG-PBR, involving neutronic analysis, pebble flow movement, and thermo-fluid dynamics, creates significant challenges for its development, optimization, and safety analysis. This study focuses on the high-fidelity neutronic modelling and analysis of HTG-PBR with an emphasis on achieving an equilibrium state of the reactor for long-term operations. Computational approaches are developed to perform high-fidelity neutronics analysis by coupling the superior modelling capacities of the Monte Carlo Method (MCM) and Discrete Element Method (DEM). The MCM-based code OpenMC and the DEM-based code LIGGGHTS are employed to simulate the neutron transport and pebble movement phenomena in the reactor, respectively. To improve the computational efficiency to expedite the equilibrium core search process, the reactor core is discretized by grouping pebbles in axial and radial directions with the incorporation of the pebble position information from DEM simulations. The OpenMC model is modified to integrate fuel circulation and fresh fuel loading. All of these measures ultimately contribute to a successful generation of an equilibrium core for HTG-PBR. For demonstration, X-energy's Xe-100 reactor—a 165 MW thermal power HTG-PBR—is used as the model reactor in this study. Starting with a reactor core loaded with all fresh pebbles, the equilibrium core search process indicates the continuous loading of fresh fuel is required to sustain the reactor operation after 1000 days of fuel depletion with depleted fuel circulation. Additionally, the model predicts 213 fresh pebbles are needed to add to the top layer of the reactor to ensure the keff does not reduce below the assumed reactivity limit of 1.01.

Evaluation of Pebble-Bed Homogenized Cross Sections in HTGR Fuel Cycle Simulations

Optimization of MOX Fuel Cycles in Pebble Bed HTGR

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

The Neutron Streaming Correction Method in the Homogenization of Pebble-bed HTGR Reflector

Numerical Simulation of the Coolant Flow and Heat Transfer Characteristics in the Reactor Core of Pebble Bed HTGR

PANGU Code for Pebble-Bed HTGR Reactor Physics and Fuel Cycle Simulations

A CFD Method for Thermal-Hydraulic Calculation of Pebble Bed HTGRs

Numerical Investigation of Mass Mixing in the Reactor Core of a Pebble Bed HTGR

Research on the Fuel Loading Patterns of the Initial Core in Chinese Pebble-Bed Reactor HTR-PM

Methodology of the On-line Follow Simulation of Pebble-bed High-temperature Reactors

Numerical Study of the Effects of Loading Method on Mixing of Two Kinds of Pebbles in HTGR: A GPU-DEM Simulation

CFD Investigation of Thermal-Hydraulic Characteristics in a PBR Core Using Different Contact Treatments Between Pebbles

Investigating Effects of Bcc and Fcc Arrangements on Flow and Heat Transfer Characteristics in Pebbles Through Cfd Methodology

Numerical Study of the Particle-Scale Heat Transfer in the HTR-PM Pebble Bed Based on GPU-DEM

Improved Methods for Calculating the Neutron Diffusion Coefficient of General Pebble Bed

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Study On Temperature Distribution Of Pebble-Bed Htr Fuel Element By Using Boundary Element Method

Experimental Study of the Pebble Distribution in the Mixing Zone of a Two-Region HTGR Reactor Core

Investigation of Flow and Heat Transfer in the Pebble Bed of the High Temperature Gas-cooled Reactor

METHODOLOGY TO CONSTRUCT BURNUP PROFILE OF FUEL PEBBLES IN PBR

Analysis of impact of mixing flow on the pebble bed high temperature reactor