Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

Effects of the Central Graphite Column Dimension and Pebble Size on Power Density Distribution in Annular Core Pebble‐bed HTR

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Study On Temperature Distribution Of Pebble-Bed Htr Fuel Element By Using Boundary Element Method

Physical Analysis of the Initial Core and Running-In Phase for Pebble-Bed Reactor HTR-PM

Research on the Fuel Loading Patterns of the Initial Core in Chinese Pebble-Bed Reactor HTR-PM

Numerical Study of the Effect of Particle Size on Pebble Flow in the HTR-PM

Integrated Parameter Mapping and Real-Time Optimization for Load Changes in High Temperature Gas-Cooled Pebble Bed Reactors

Thermal Hydraulic Analysis of High-Temperature Gas-Cooled Reactor Pebble-Bed Module Using a Systematic Parameter Estimation Approach

Numerical Study of the Particle-Scale Heat Transfer in the HTR-PM Pebble Bed Based on GPU-DEM

High-Fidelity Depletion-Pebble-Flow Coupling Simulation of Pebble Bed Reactor HTR-PM

Uncertainty Quantification of Fuel Pebble Model and Its Effect on the Uncertainty Propagation of Nuclear Data in Pebble Bed HTR

Methodology of the On-line Follow Simulation of Pebble-bed High-temperature Reactors

DEM simulation of pebble flow in HTR 10 core by phenomenological method

Random Geometry Capability in RMC Code for Explicit Analysis of Polytype Particle/pebble and Applications to HTR-10 Benchmark

Uncertainty and Sensitivity Analysis of Filling Fraction of Pebble Bed in Pebble Bed Htr

Effect of Nuclear Data on Fuel Element Neutronic Characteristicsof Pebble-bed High Temperature Gas-cooled Reactor

Study on the Curved Channel Model in the Initial Core Loading of Pebble Bed High Temperature Reactors

Evaluation of Pebble-Bed Homogenized Cross Sections in HTGR Fuel Cycle Simulations

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

ICONE19-43911 THE SIMULATION ON THE RUNNING-IN PHASE OF THE HTR-10