Abstract:The on-line fuel management is an essential feature of the pebble-bed high-temperature reactors (PB-HTRs), which is strongly coupled with the normal operation of the reactor. For the purpose of on-line analysis of the continuous shuffling scheme of numerous fuel pebbles, the follow simulation upon the real operation is necessary for the PB-HTRs. In this work, the on-line follow simulation methodology of the PB-HTRs’ operation is described, featured by the parallel treatments of both neutronics analysis and fuel cycling simulation. During the simulation, the operation history of the reactor is divided into a series of burn-up cycles according to the behavior of operation data, in which the steady-state neutron transport equations are solved and the diffusion theory is utilized to determine the physical features of the reactor core. The burn-up equations of heavy metals, fission products and neutron poisons including B-10, decoupled from the pebble flow term, are solved to analyze the burn-up process within a single burn-up cycle. The effect of pebble flow is simulated separately through a discrete fuel shuffling pattern confined by curved pebble flow channels, and the effect of multiple pass of the fuel is represented by logical batches within each spatial region of the core. The on-line thermal-hydraulics feedback is implemented for each bur-up cycle by using the real thermal-hydraulics data of the core operation. The treatment of control rods and absorber balls is carried out by utilizing a coupled neutron transport-diffusion calculation along with discontinuity factors. The physical models mentioned above are established mainly by using a revised version of the V.S.O.P program system. The real operation data of HTR-10 is utilized to verify the methodology presented in this work, which gives good agreement between simulation results and operation data.

ICONE19-43911 THE SIMULATION ON THE RUNNING-IN PHASE OF THE HTR-10

Simulation Method for Running-in Phase of HTR-10

Progress Of The Htr-10 Measured Data Utilization

A Personal Computer-Based Simulation-And-Control-Integrated Platform for 10-Mw High-Temperature Gas-Cooled Reactor

Thermal Hydraulic Calculation of the HTR-10 for the Initial and Equilibrium Core

Fuel Management of the HTR-10 Including the Equilibrium State and the Running-in Phase

Methodology of the On-line Follow Simulation of Pebble-bed High-temperature Reactors

Simulation of the HTR-10 Operation History with the PANGU Code

Fuel Management of HTR-10

Dynamic simulation and optimization of load change operation of high-temperature gas-cooled reactor pebble-bed module

Simulation of the HTR-10Primary Mass Flow Variation Test

Post-test simulation of the HTR-10 reactivity insertion without scram

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

Experimental Study on the Residual Heat Removal System in HTR-10

DEM simulation of pebble flow in HTR 10 core by phenomenological method

Physical Analysis of the Initial Core and Running-In Phase for Pebble-Bed Reactor HTR-PM

Study on dynamic characteristics of HTR-10 at full power operation

RESEARCH ON HEAT TRANSFER CHARACTERISTICS OF THE THERMOMETRIC SPHERE IN HTR-10

Development and Primary Verification of A Transient Analysis Software for High Temperature Gas-Cooled Reactor Helium Turbine Power System

Real-Time Simulation Platform for the Design and Verification of the Operation Strategy of the HTR-PM

A one-dimensional code of the passive residual heat removal system for the modular high temperature gas-cooled reactor