Abstract:In response to the high cost of magnesium phosphate cement (MPC), due to the high production energy consumption of raw material MgO (sintering at 1600 °C for 5 h), and the requirement of adding retarders during the preparation process, we proposed using common elements B, Li, Na, K, and Cl in salt lakes to promote the sintering performance of MgO. We subsequently studied the preparation technology of low-activity MgO obtained from the pyrolysis of bischofite in salt lakes and low-temperature sintering (≤ 1200 °C). The migration law of coexisting elements and low-temperature sintering mechanism of salt lake bischofite was revealed during pyrolysis and low-temperature sintering, expanding the utilization path of salt lake bischofite and promoting resource recycling. We simultaneously developed a preparation technology for low-activity MgO used as raw MPC material, avoiding the use of retarders and reducing the raw material costs in the preparation of MPC. The results showed that coexisting elements migration was present in four different types of processes during the sintering process. Octahedral particles with a preferred orientation and exposed MgO (111) crystal face were obtained. With increased sintering temperature and time, the content and particle size of MgO increased and the specific surface area and porosity decreased, which led to the prolonged neutralization reaction time, as well as increased sintering degree and decrease in hydration activity. The formation of the liquid phase by bischofite and its coexisting elements was the key to MgO sintered at 1000 °C.

Research on preparation of high purity magnesite from MgCl2·6H2O

Study on Preparation of MgO Crystal Whisker from Magnesite

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Preparation of Ccalcining MgO and its precursor

Preparation of High-Purity Magnesia Spinel Refractory Raw Materials with Spinel-Wrapped Periclase Structures Using Bischofite from Salt Lake

Preparation of High-Purity Ultrafine Magnesium Hydroxide Using Solid-State Reaction Method

Thermal characterization and kinetic analysis of nesquehonite, hydromagnesite, and brucite, using TG–DTG and DSC techniques

Preparation and properties of porous MgO based ceramics from magnesite tailings and fused magnesia

Preparation of Carnallite and Magnesium Sulfate from Refined Magnesium Slag

Preparation technology and microstructural changes of low-activity magnesium oxide based on salt lake bischofite

Preparation of high purity magnesium by vacuum gasification-directional condensation technology

Activity Research of Magnesia Formed on Calcination of Bischofite

Preparation and Characterization of Microporous Magnesia‐based Refractory

Preparation of Active Magnesia with Magnesite

Preparation of High-Purity Magnesium from Electrolytically Produced Crude Magnesium via Vacuum Distillation

The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor: The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor

Preparation of magnesium hydroxide by ammonia gas method

Bulk Mg-doped Spherical Lithium Cobalt Oxide Preparation and Characterization of Precursor

Preparation of Nanometer Magnesia with High Surface Area and Study on the Influencing Factors of the Preparation Process

Preparation of High-Purity Nanosized Magnesium Hydroxide

Low-Temperature Preparation of Porous Cordierite Materials with Fly Ash and Magnesite