Abstract:Experiments have been carried out to separate elements of magnesium and lithium from seawater to produce a lithium concentrate product that is free of magnesium through sodium silicate precipitation processes. In this study, the sample used was seawater taken from the Ancol Lagoon Area, North Jakarta. The sea water used contains 0.1674 ppm lithium ions and 1761 ppm magnesium ions with a high Mg/Li ratio of 10521. The seawater containing high levels of magnesium is not suitable as a raw material for for the manufacture of lithium carbonate (battery active ingredient) prior to initial processing. The research variable was the volume of sodium silicate solution added by 10 ml, 20 ml, 30 ml, 40 ml, 50 ml, 60 ml, 70 ml, and 100 ml which were equivalent to 13%, 27% 40%, 53%, 67%. , 80 %, 93%, and 107% stoichiometry of magnesium ion and the technique of adding sodium silicate solution included a single stage and multi-stages. From the experimental results, it can be seen that the most effective addition of sodium silicate is the addition of 80% stoichiometry. The sodium silicate precipitation process succeeded in separating magnesium ions and lithium ions from seawater as indicated by a decrease in the Mg/li ratio from 10521 to 64. The obstacle in this study was that there were still many lithium ions that were also precipitated with magnesium silicate during the precipitation process so that the lithium lost in the filtrate reached 82.26% in the single stage process. Therefore, a multi-stage process was carried out with 6 stages of the process that the addition of sodium silicate for each stage was 1/6 of the volume of sodium silicate solution at single stage optimum conditions. The results obtained from the multi-stage process were able to reduce the lithium ion lost in the filtrate to 76.54%. From the results of the study, it can be concluded that efforts to reduce the percentage of lithium ions lost in the filtrate product need to be carried out through the development of a sodium silicate precipitation process.

Forsterite refractory preparation using magnesium resources from salt lake brines

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Separation of magnesium from lithium in salt-lake brine through struvite precipitation

Preparation of High-Purity Magnesia Spinel Refractory Raw Materials with Spinel-Wrapped Periclase Structures Using Bischofite from Salt Lake

Specific capture of magnesium ions by phosphorus atomic sites on self-floating nuclei advances Mg/Li separation in salt lakes brine

Extraction of lithium from brines with high Mg/Li ratio by the crystallization-precipitation method

Synthesis of functional ionic liquids with high extraction rate and electroconductivity for lithium-magnesium separation and metallic magnesium production from salt lake brine

Separation Study of Magnesium–Lithium from Low‐Mg/Li Brine

Highly Efficient Separation of Magnesium and Lithium and High-Valued Utilization of Magnesium from Salt Lake Brine by a Reaction-Coupled Separation Technology

Integrated separation of precipitation and three-liquid-phase extraction for boron, lithium and magnesium from salt lake brine with high magnesium-lithium ratio

Assessing Magnesia Effect on Preparing Refractory Materials from Ferrochromium Slag

An integrated membrane process for preparation of lithium hydroxide from high Mg/Li ratio salt lake brine

Preparation technology and microstructural changes of low-activity magnesium oxide based on salt lake bischofite

PROPERTIES OF MAGNESIA BASED DRY VIBRATION MIXTURE CONTAINING FORSTERITE FOR TUNDISH

Magnesium ion effect in the process of lithium migration in salt lake

Extraction of lithium from salt lake brine containing borate anion and high concentration of magnesium

Sintering and Performance of MgO from Bischofite with ZrO2 Additive

Research on preparation of high purity magnesite from MgCl2·6H2O

Lithium extraction from low-grade salt lake brine with ultrahigh Mg/Li ratio using TBP – kerosene – FeCl3 system

Recent Progress in Molten Salt Electrolysis Using a Liquid Metal Cathode and Vacuum Distillation for the Production of Ultra-High-Purity Mg Metal from MgO

EFFECTIVENESS OF THE SEPARATION OF MAGNESIUM AND LITHIUM FROM SEAWATER WITH SODIUM SILICATE PRECIPITATION PROCESS