Abstract:Here, we reported a strategy of using an eggshell membrane to produce hierarchically porous carbon as a low-cost substrate for synthesizing a nano-nickel oxide catalyst (), which can effectively turn biowaste—urea—into energy through an electrochemical approach. The interwoven carbon networks within NiO led to highly efficient urea oxidation due to the strong synergistic effect. The as-prepared electrode only needed 1.36 V versus reversible hydrogen electrode to realize a high efficiency of 10 mA cm–2 in 1.0 M KOH with 0.33 M urea and delivered an even higher current density of 25 mA cm–2 at 1.46 V, which is smaller than that of the porous carbon and commercial Pt/C catalyst. Benefiting from theoretical calculations, Ni(III) active species and the porous carbon further enabled the electrocatalyst to effectively inhibit the "CO2 poisoning" of electrocatalysts, as well as ensuring its superior performance for urea oxidation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c07614?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c07614</a>.HRTEM image of nanocomposites; SEM images of NiO particles and the porous carbon; TGA curve of nanocomposites; comparison of CV results for NiO, porous carbon, and nanocomposites in the absence and presence of urea in the alkaline solution; CV curves of the GCE, porous carbon, Pt/C and nanocomposites in a narrow range; current response at different potentials on the electrode; TEM images of nanocomposites after urea oxidation; adsorption energy of urea/CO2 on porous and ; d density of states of Ni in NiO and NiOOH; and comparison of the UOR performance and mass loadings between recently reported electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c07614/suppl_file/sc0c07614_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Urea Combustion in situ Synthesis of NiO YSZ Composite Powders for Solid Oxide Electrolysis Cells

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Preparation Of Nanosized Nio-Ysz Composite Powders By Situ-Precipitation Method

Novel Co-precipitation method to synthesize NiO-YSZ nanocomposite powder for solid oxide fuel cell

Preparation and Characterization of NiO/YSZ Cathode and BSCF/SDC Anode of SOEC for Hydrogen Production

Preparation And Properties Of Nio-Coated Ysz Anodes For Solid Oxide Fuel Cells

Preparation of Ni/YSZ for SOFC Anodes by combustion synthesis

Performance of NiO-YSZ Anode with NiO Powder Synthesized by Precipitation Method

Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ Composite Cathode Powders for Tubular Solid Oxide Fuel Cells by Microwave-Induced Monomer Gelation and Gel Combustion Synthesis Process

A Novel Method to Purposely Modify the Anode/Electrolyte Interface in Solid Oxide Fuel Cells

Porous NiO–YSZ and Ni–YSZ composites fabricated using NiO–YSZ composite nanopowders and WO3 additive

Preparation of Ni/Ysz Materials for Sofc Anodes by Buffer-Solution Method

Co-synthesized Y-stabilized Bi2O3 and Sr-substituted LaMnO3 Composite Anode for High Performance Solid Oxide Electrolysis Cell

Preparation and Electrochemical Performance of Silver Impregnated Ni-YSZ Anode for Solid Oxide Fuel Cell in Dry Methane

The convenient synthesis and the enhanced urea oxidation of NiO-CrO@N-C

Preparation of nickel manganese oxide modified ni foam for anode catalyst direct urea fuel cell

Facile synthesis of mesoporous spinel NiCo₂O₄ nanostructures as highly efficient electrocatalysts for urea electro-oxidation.

Highly Efficient Urea Oxidation via Nesting Nano-Nickel Oxide in Eggshell Membrane-Derived Carbon

Effect of NiO/YSZ Compositions on the Co-Sintering Process of Anode-Supported Fuel Cell

Preparation of LSM–YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism