Abstract:Combustion synthesis has attracted considerable attention recently for its advantages of low processing cost, high energy efficiency, and high production rate. This chapter presents the preparation of functional oxide materials for energy storage or conversion by cellulose-assisted combustion synthesis. In traditional solid-solution-phase combustion synthesis, e.g., the glycine-nitrate process (GNP), a great quantity of gas is evolved during the synthesis, which can create large amounts of ash by blowing away the products. Natural cotton fibers with a hierarchical pore structure were used as a micro-reactor for the GNP in this study. This novel process is environmentally friendly. Furthermore, the resulting particle size was smaller, which was attributed to the blocking effect of cellulose on inter-particle contact during the synthesis. The method was applied for the synthesis of samaria-doped ceria (SDC) as an electrolyte for solid-oxide fuel cells (SOFCs). SDC powder with a particle size as small as 10 nm was obtained, which was easily sintered to form a dense electrolyte at 1350 oC, several hundred degrees lower than that prepared from the traditional solid-state reaction. La0.6Sr0.4Co0.2Fe0.8O3 perovskite oxide was also prepared and showed higher purity and better cathode performance in SOFCs than that prepared by a sol-gel process. By adopting the same method, phase-pure spinel Li4Ti5O12 could be synthesized at 700 oC. The resulting powder had an excellent rate performance in secondary lithium-ion batteries, with a capacity of 140 mAh g-1 even at a 10 C discharge rate. More importantly, solid TiO2 oxides can also be utilized as the raw materials for this synthesis, making the process highly cost-attractive.

Functional nano-composite oxides synthesized by environmental-friendly auto-combustion within a micro-bioreactor

ChemInform Abstract: Cellulose‐Assisted Combustion Synthesis of Functional Materials for Energy Storage or Conversion

LSCF Nanopowder from Cellulose–Glycine-Nitrate Process and its Application in Intermediate-Temperature Solid-Oxide Fuel Cells

Synthesis of nanocrystalline conducting composite oxides based on a non-ion selective combined complexing process for functional applications

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Synthesis and Characterisation of Nanocrystalline CoxFe1-xGDC Powders as a Functional Anode Material for the Solid Oxide Fuel Cell

Self-optimized and Stable Nanocomposites Via One-Pot Synthesis for High-Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

A Facile Combustion Synthesis of Ce0.8Sm0.2O1.9 Powders by in Situ Assembly of Polymer

Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ Composite Cathode Powders for Tubular Solid Oxide Fuel Cells by Microwave-Induced Monomer Gelation and Gel Combustion Synthesis Process

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method

Colloidal spray pyrolysis preparation and characterization of nanocrystalline NiO-SDC composite powders for SOFCs

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

A cobalt-free composite cathode prepared by a superior method for intermediate temperature solid oxide fuel cells

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

Doped Ceria Electrolyte Powders Of High Sinterability Synthesized By Glycine-Nitrate Process

Gel-cast NiO–SDC Composites As Anodes for Solid Oxide Fuel Cells

Synthesis of functionally graded cathodes for intermediate temperature solid oxide fuel cells