Abstract:In contrast to alternating current(AC) power transmission,direct current(DC) power transmission has a series of advantages,such as low line loss and nonexistence of the problem of system synchronous operation stability.In recent years, with the rapid development of voltage source converter technology with higher voltage,the study on flexible multi-terminal high voltage direct current transmission(HVDC) system,DC transmission and distribution power net,as well as the related key technologies and equipments such as the high-voltage DC circuit breaker (DC-breaker) has captured great attention from the community at home and abroad.The research status of three types of DC-breakers(spoken of as the mechanical type,all-solid-state and hybrid type DC-breakers) and their topologies,working principles,advantages as well as disadvantages are briefly treated.It is concluded that the hybrid type should be the main trend of development for high-voltage DC-breakers. Furthermore,a scheme of hybrid DC-breakers with fault current limiting is proposed, its feasibility verified through simulation.In this scheme the DC-breaker adopts the hybrid solid-state switch (composed of half and full gate-controlled devices in series connection) which is paralleled with a mechanical breaker involving the fault-current-limiting technology. Therefore the rising rate of short-circuit current can be effectively restrained,relieving the requirement on fault diagnosis sensitivity and mechanical breaker speed.Moreover,the series quantities of solid-state switching devices (especially the expensive full gate-controlled devices such as the insulated gate bipolar transistor)in high voltage application,and the technical difficulty and production costs etc will be reduced.

Influence on Switching Capability of HV Circuit Breakers by Employing Rectifier Type Fault Current Limiter

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Simulation Study of Series Resonance Type Fault Current Limiter

Analysis of Short-time Withstand Current and Peak Withstand Current Test of 500kV AC Fault Current Limiter

Analysis and Design of the High Current Rising Rate Hybrid DC Current Limiting Circuit Breaker

Study on Applicability of Circuit Breaker Closing Resistance in EHV and UHV AC Systems

Diode Clamping Based Current-transferring High Voltage DC Breaker

Optimization Of Current Breaker And Fault Current Limiter In Dc Micro-Grid Based On Faulty Transient Analysis

Study on reliability improvement of current-transferring type HVDC circuit breaker

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Parameters Selection Method Of Circuit Breaker And Fault Current Limiter In Mesh-Type Dc Microgrid

A novel current-limiting hybrid DC breaker based on thyristors

Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 Kv Fast Vacuum Switch

Research of fault current limiter based on half-controlled rectifier bridge for three-phase four-wire power system

Analysis of the Influence of the Breaking Radiation Magnetic Field of a 10 kV Intelligent Circuit Breaker on an Electronic Transformer

Flexible Fault Current Adaptation Features of A Novel DC Circuit Breaker Assisted by Superconducting Fault Current Limiters

A Forced Commutation Breaking Method of Dc Circuit Breaker Taking Account of Load Current Occasions

Research on Effect of Circuit Parameters on Breaking Characteristics of Mechanical DC Circuit Breaker

Influence of DC Component Time Constants on Asymmetrical Fault Interruption of 126 kV SF 6 Circuit Breakers