Abstract:Electromagnetic reverberation chamber has been widely used in radiated-immunity test due to its low construction cost,short experimental time,effective simulation of the real electromagnetic environment,accurate test result,enhanced test repeatability,small measurement uncertainty,and so on.The application of the reverberation chamber requires a calibration before the EMI/EMS tests,in which statistical analysis of the calibration data proves the field homogeneity in the working volume and provides the necessary parameters for EMI/EMS tests.The key parameters include field uniformity,quality factor,average normalized electric field,receive antenna calibration factor and insertion loss,among which receive antenna calibration factor and insertion loss are the basic parameters to obtain the electromagnetic emission power.In this paper,in order to verify repeatability of the test in reverberation chamber,the antenna calibration factor and insertion loss of our developed reverberation chamber is investigated at the calibration stage.Calibrations with different transmit antenna positions and directions are investigated by measurement carefully.It is indicated that the key parameters of the reverberation chamber have good testing repeatability and this will ensure good test repeatability for electromagnetic susceptibility test and electromagnetic emission test.The test results prove that there is a time-averaged spatially homogenous field distribution inside the chamber.All test results reveal that this reverberation chamber conforms to the specification of the IEC standard and can be used in the common EMC test. All the test result will be useful for investigation of the mechanism of the reverberation chamber.

Technology of the Reverberation Chamber for EMC Test

Calibration Test of Reverberation Chamber

A Fast Technique to Evaluate Uniformity Conformity to Standards' Requirement for a Reverberation Chamber at the Low End of Test Frequency

Design and Calibration of Reverberation Chamber

Testing Investigation of Antenna Calibration Factor and Insertion Loss of a Reverberation Chamber

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

Comparison on the Test Results Between Reverberation Chamber and Anechoic Chamber

Evaluation of the Split Stirrer in Reverberation Chamber

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

Evaluation Of Transmit Antenna Position In Reverberation Chamber

Evaluation Of Test Reproducibility Of Calibration In Reverberation Chamber

Field Uniformity Investigation Of Reverberation Chamber At Calibration Stage

Loading Effect of Eut on Maximal Electric Field Level in A Reverberation Chamber for Immunity Test

Measurement of the Quiet Zone Performance of Microwave Anechoic Chamber

Research on design of electromagnetic compatibility shielded anechoic chamber

Calibrating the Phased Array Antenna in a Reverberation Chamber

Semi-anechoic chamber for electromagnetic compatibility tests of electric propulsion thrusters

Influence of Reflectors on Field Uniformity in Reverberation Chamber

An Alternative Method to Identify the Susceptibility Threshold Level of Device under Test in a Reverberation Chamber

Uncorrelated Configurations and Field Uniformity in Reverberation Chambers Stirred by Tunable Metasurfaces