Abstract:An effective source reconstruction method (SRM) to predict the noise coupling from an unknown electromagnetic interference (EMI) source inside a shielding enclosure is proposed in this work. On account of the difficulty and time-consuming in phase measurement of near-field, the magnitude-only near-field scanning is employed to obtain the near-field above EMI sources in free space, and the leakage near-field from the slots and/or holes of a shielding enclosure after the EMI source is inserted into the enclosure. The infinitesimal dipole is used as the equivalent source of the EMI source. The proposed method can generally be divided into three steps. First, the positions and initial moments of the equivalent dipoles of an unknown EMI source without any shielding enclosure are derived by using dynamic differential evolution (DDE) algorithm. Second, the obtained dipoles are thereafter placed into an arbitrarily shaped shielding enclosure, and the full-wave simulation is implemented to build the relationship between the dipoles and the measured leakage field from the slots/holes of the shielding enclosure. Third, the dipole moments are thereby optimized by using the DDE method again based on the magnitude-only leakage field. It is worth highlighting that only a relatively small region of near-field on the leakage plane is sufficient for obtaining an effective equivalent dipole model in the shielding enclosure. The results of numerical simulation and physical measurement have verified the effectiveness of the proposed SRM for modeling unknown EMI sources in a shielding enclosure.

An Alternative Method to Identify the Susceptibility Threshold Level of Device under Test in a Reverberation Chamber

Evaluation of the Method Based on Psr Techniques for Target Detection in Reverberation

A Fast Technique to Evaluate Uniformity Conformity to Standards' Requirement for a Reverberation Chamber at the Low End of Test Frequency

The Validation of the Simulated HIRF Effects in Metallic Cases Using Parallel FDTD Solver on a High Performance Computer

Loading Effect of Eut on Maximal Electric Field Level in A Reverberation Chamber for Immunity Test

Simulating Rician Environment Using Switchable Metasurface Absorber in Reverberation Chambers

Calibration Test of Reverberation Chamber

An Effective Equivalent Radiation Source Based on Near-field Scanning for Electromagnetic Interference Estimation

Statistical Analysis of Measurement Uncertainty in Total Radiated Power of Wireless Devices in Reverberation Chamber

A Measurement Verification for EMI Source Reconstruction Method Based on Amplitude-only Near-Field Scanning

Comparison on the Test Results Between Reverberation Chamber and Anechoic Chamber

Reverberation Chamber Techniques for Determining the Adjacent Channel Leakage Power Ratio of Wireless Devices

Electromagnetic Susceptibility Analysis In Device Level With Numerical Technique Based On Electric Field Integral Equation

EMI Source Reconstruction by Using Equivalent Dipoles at Different Height

A Source Reconstruction Method for Unknown EMISources Inside a Shielding Enclosure Based Onmagnitude-Only Near-Field Scanning

Analysis of TRP and TIS Tests with Different Combinations of Mechanical Stirring Samples

Effects of User Proximity on Total Radiated Power and Total Isotropic Sensitivity Measurements in Reverberation Chambers.

A Novel Method to Simulate the Electromagnetic Susceptibility Problem

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

An Effective Method for Episphere Total Radiated Power Tests of Millimeter-Wave Antenna Arrays.

Technology of the Reverberation Chamber for EMC Test