Abstract:Journal of Industrial Textiles, Volume 52, Issue , July-December 2022. There is no perfect method to test and evaluate electromagnetic shielding (EMS) clothing up to now. The main reason is that the influence laws of the emission source parameters and the test position on the shielding effectiveness (SE) of the EMS clothing has not been clarified. In this paper, the SE of the EMS clothing is tested using a semi anechoic chamber in the frequency range of 1–18 GHz. The variation of the SE of the clothing is explored when the emission source parameters and the test positions are different. It is found that the SE of the EMS clothing decreases obviously with the increase of the testing distance, and the decline degrees are different with different frequencies. The decline trend slows down and approaches stability as the distance increases to a certain extent. The influence of the emission source angle on the SE is closely related to the frequency and positive or negative effects are produced at different frequency points. The SE are low when the test points are in the leakage areas with seams and openings, and the SE are high in the normal area. Under certain conditions, the measured SE of the clothing is close to zero or even less than zero. That is, a dangerous frequency point is formed. The mechanism of the above-mentioned laws is analyzed, and a new multi-index composite evaluation method is proposed to scientifically evaluate the EMS clothing based on the comprehensive consideration of the influencing factors. This research has great significance to promote the scientific test, evaluation and relevant standard formulation of the EMS clothing, and provides a reference role for the design and production of the EMS clothing.

Loading Effect of Eut on Maximal Electric Field Level in A Reverberation Chamber for Immunity Test

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

Comparison on the Test Results Between Reverberation Chamber and Anechoic Chamber

Investigation on Time- and Frequency-Domain Responses of Some Complex Composite Structures in the Presence of High-Power Electromagnetic Pulses

Load Effect Investigation Of A Reverberation Chamber

Characterization of shielding effectiveness of metallic frustum cone-like cabin with one coaxial feeding monopole antenna illuminated by a HEMP

A novel dielectric conformal FDTD method for computing SAR distribution of the human body in a metallic cabin illuminated by an intentional electromagnetic pulse (IEMP)

Transient Electromagnetic Response Of A Coaxial Feeding Monopole Antenna Mounted On A Rectangular Metallic Enclosure Illuminated By Electromagnetic Pulses (Emp)

A Fast Technique to Evaluate Uniformity Conformity to Standards' Requirement for a Reverberation Chamber at the Low End of Test Frequency

Electromagnetic Susceptibility Analysis In Device Level With Numerical Technique Based On Electric Field Integral Equation

Calibration Test of Reverberation Chamber

Testing Investigation of Antenna Calibration Factor and Insertion Loss of a Reverberation Chamber

An Alternative Method to Identify the Susceptibility Threshold Level of Device under Test in a Reverberation Chamber

Efficient EMC Simulation of Enclosures with Apertures Residing in an Electrically Large Platform Using the MM-UTD Method

Numerical Characterization And Evaluation Of Esd Induced Field And Coupling On Interconnection Cable

Technology of the Reverberation Chamber for EMC Test

Electromagnetic Environment under UHVAC(1000kV) Transmission Lines

Analysis of the Electromagnetic Effect Mechanism of EED under Continuous Wave Radiation

[Research on Electromagnetic Compatibility Immunity Testing Methods for Proton Therapy System]

Influencing factors of shielding effectiveness test of electromagnetic shielding clothing

Frequency-time Domain Shielding Effectiveness of Materials and Their Strong Electromagnetic Field Test