Abstract:Journal of Industrial Textiles, Volume 52, Issue , July-December 2022. There is no perfect method to test and evaluate electromagnetic shielding (EMS) clothing up to now. The main reason is that the influence laws of the emission source parameters and the test position on the shielding effectiveness (SE) of the EMS clothing has not been clarified. In this paper, the SE of the EMS clothing is tested using a semi anechoic chamber in the frequency range of 1–18 GHz. The variation of the SE of the clothing is explored when the emission source parameters and the test positions are different. It is found that the SE of the EMS clothing decreases obviously with the increase of the testing distance, and the decline degrees are different with different frequencies. The decline trend slows down and approaches stability as the distance increases to a certain extent. The influence of the emission source angle on the SE is closely related to the frequency and positive or negative effects are produced at different frequency points. The SE are low when the test points are in the leakage areas with seams and openings, and the SE are high in the normal area. Under certain conditions, the measured SE of the clothing is close to zero or even less than zero. That is, a dangerous frequency point is formed. The mechanism of the above-mentioned laws is analyzed, and a new multi-index composite evaluation method is proposed to scientifically evaluate the EMS clothing based on the comprehensive consideration of the influencing factors. This research has great significance to promote the scientific test, evaluation and relevant standard formulation of the EMS clothing, and provides a reference role for the design and production of the EMS clothing.

Frequency-time Domain Shielding Effectiveness of Materials and Their Strong Electromagnetic Field Test

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

Accurate Characterization. of Shielding Effectiveness of Metallic Enclosures with Thin Wires and Thin Slots

Shielding Effectiveness Characterization Of Metallic Enclosures With A Thin-Sheet Panel Illuminated By A Arbitrary Polarizations High-Power Emp

Efficient Approaches to Improve the Shielding Effectiveness of Metallic Enclosure with Apertures

Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package

Measurement and Analysis on Magnetic Field Influence of Substation for Magnetic Shielding Device

Shielding Effectiveness Characterization of Metallic Rectangular Cascaded Enclosures

A Test Method for Shielding Effectiveness of Materials against Electromagnetic Pulse Based on Coaxial Flange

Subwavelength Periodic Shielding Materials: Toward Enhanced Shielding of the Incomplete Enclosure

The Shielding Effectiveness of the CNTs/SSFs/PA6 Conductive Composites

Electromagnetic shielding behaviors of planar frequency selective surface fabrics, with emphasis on decoupling analysis, lamination direction and tunable selective frequency

Review of carbon-based electromagnetic shielding materials: film, composite, foam, textile

Functional and Structural Facts of Effective Electromagnetic Interference Shielding Materials: A Review

Influencing factors of shielding effectiveness test of electromagnetic shielding clothing

Evaluation of Shielding Effectiveness of Physically Small Enclosures Using Different Types of Receiving Antennas Via Full-wave Simulation

Analysis of Electromagnetic Shielding Effectiveness of Metal Material

Notice of Retraction: Analysis of Near-Field Shielding Effectiveness for the SiP Module

Electrical-magnetic Field Shield Technology and Material Development

Shielding Effectiveness Measurement of SiP Based on Near-Field Scanning

Functional composite electromagnetic shielding materials for aerospace, electronics and wearable fields