Abstract:A vertical-type InGaN light-emitting diode with a resonant cavity was demonstrated with a 9 μm aperture size and a short cavity formed by hybrid distributed Bragg reflectors (DBRs). The approach involved designing epitaxial structures and utilizing an electrochemical etching process to convert heavily doped n-type gallium nitride (n+-GaN) layers into porous GaN layers as a porous-GaN DBR structure. Thirteen pairs of the conductive porous-GaN:Si/GaN:Si DBR structure provided a vertical current path in a vertical-type light-emitting diodes (LED) structure. The LED epitaxial layers were separated from sapphire for membrane-type LED structures through a laser lift-off process. During the free-standing membrane fabrication process, the dielectric DBR deposited on ITO/p-GaN:Mg layers was inverted from top to bottom, thereby establishing the concept of higher reflectivity for the bottom DBR compared to the porous-GaN DBR. The physical cavity length was reduced from about 2.3 μm for the LED membrane to 0.74 μm for the membrane-type LED with the embedded porous-GaN DBR structure. The divergent angles and line width of EL emission light were reduced from 124°/31.7 nm to 44°/3.3 nm due to the resonant cavity effect. The membrane-type LED structures with hybrid DBRs consisted of small divergent angles, narrow line width, and vertical current injection properties that have potential for directional emission light sources and vertical-cavity surface-emitting diode laser applications.

InGaN based vertical light emitting diodes with acid modified graphene transparent conductor and highly reflective membrane current blocking layer

Partially Sandwiched Graphene As Transparent Conductive Layer for Ingan-Based Vertical Light Emitting Diodes

Efficient Performance Enhancement of GaN-based Vertical Light-Emitting Diodes Coated with N-doped Graphene Quantum Dots

High-power and reliable GaN-based vertical light-emitting diodes on 4-inch silicon substrate

Enhanced performance of GaN-based ultraviolet light emitting diodes with ITO/graphene/ITO transparent conductive layer

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

The Fabrication of GaN-based Nanorod Light-Emitting Diodes with Multilayer Graphene Transparent Electrodes

High-Efficiency InGaN/GaN Quantum Well-Based Vertical Light-Emitting Diodes Fabricated on β-Ga2O3 Substrate

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes

Improved Optical and Electrical Characteristics of GaN-Based Micro-LEDs by Optimized Sidewall Passivation

Vertical InGaN Light-Emitting Diode with Hybrid Distributed Bragg Reflectors

Increase in Light Extraction Efficiency of Vertical Light Emitting Diodes by a Photo-Electro-chemical Etching Method

Graphene-Based Transparent Conductive Electrodes for Gan-Based Light Emitting Diodes: Challenges and Countermeasures

Improving Light Output of Vertical-Stand-Type InGaN Light-Emitting Diodes Grown on a Free-Standing GaN Substrate with Self-Assembled Conical Arrays

High-Power GaN-Based Vertical Light-Emitting Diodes on 4-Inch Silicon Substrate

Performance-improved Vertical GaN-based Light-Emitting Diodes on Si Substrates Through Designing the Epitaxial Structure

Improved Transport Properties of Graphene/Gan Junctions in Gan-Based Vertical Light Emitting Diodes by Acid Doping

Graphene Transparent Electrodes Grown by Rapid Chemical Vapor Deposition with Ultrathin Indium Tin Oxide Contact Layers for Gan Light Emitting Diodes

Study of a GaN/InGaN-based Light Emitting Diode with an Indium Gallium Oxide Current Blocking Layer, Silver Nanoparticles, and a Gallium Oxide Surface Passivation Layer

Enhanced Performance of Large-Area Vertical Light-Emitting Diodes Treated by Laser Irradiation